Diamond Audio Technology HP650 Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Diamond Audio Technology HP650. Diamond Audio Technology HP650 8 pages. Hex pro series 6.5” component system

Imprimer la page

TDX™ TECHNOLOGY

Thermal-Dyne eXtreme

is a fundamentally different solution. The concept is simple, eliminate the

™

detrimental effects of heat in a loudspeaker system. The solution however, is quite complex. Our

engineers decided to start with a fresh sheet of paper and build a new line of products that addressed

the thermal problems and shortcomings of conventional designs while significantly raising the existing

level of performance.

speaker technology, it must first be compared to that of a conventional speaker

To understand TDX

™

design. At the heart of every speaker is a permanent magnet motor structure that provides the

magnetic energy, or force to move the voice coil back and forth within the magnetic air gap. Conven-

tional speakers use a large ceramic magnet surrounding the voice coil that actually retains heat rather

than dissipating it. TDX

motors use a small but very efficient high temperature Neodymium magnet

™

mounted inside the voice coil. The geometry, venting and material selection for the motors have all

been optimized for ideal thermal dissipation. The TDX™ thermal efficiency is nearly (5) times greater

than conventional designs. In conjunction with the motor design, TDX™ Technology utilizes die-cast

aluminum frame structures to act as a heat sink for the encapsulated motor structure. To insure

maximum heat transfer from the encapsulated motor case to the aluminum frame, a special thermal

paste fills any surface voids that may be present in this mating surface.

The evolution of TDX

Technology can be seen in the new HEX

Pro series of products. The new HEX

™

Pro component systems take this TDX

Technology and expand on it to maximize the benefit for

™

superior full spectrum audio performance. To faithfully reproduce an extended frequency range, the

materials and design must be optimal. This coupled with a demand for very high power handling, is

extremely challenging. These systems utilize an improved version of our legendary HEX

cone, our

™

patented dual-tuned chamber tweeter along with our extruded aluminum, high power, programmable

crossover to make the very best speaker system available in mobile audio. Period.