Aquatec orca f Instructions de montage

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Aquatec orca f. Aquatec orca f 4 pages.

Imprimer la page
Aquatec orca f Instructions de montage
Aquatec® ORCA, ORCA F, ORCA XL
Assembly instructions: Spare Parts Kit - Changing the seat plate
Montageanleitung: Ersatzteil-Kit - Sitzplatte austauschen
When replacing the backrest for products produced before May 2015, the seat plate will also need to
i
be changed. For production date, see identification label on the backside of the backrest.
Safety information
WARNING Risk of injury
If the bath lift is not assembled correctly it can cause accidents and severe
injuries.
▸ Assembly and Disassembly of the bath lift should only be carried out by an
authorized specialist dealer.
CAUTION
Danger of crushing and pinching your hands and fingers.
▸ Take care of your hands and fingers when working on the lifting scissors of
the bath lift.
IMPORTANT
▸ Run the unloaded lift once to the top and then back to the bottom after the
seat plate has been changed (function test).
Scope of delivery
Spare parts kit (part no. 1580158) contains the following items:
Pos. Designation
Backrest
Seat plate
Socket pin (ORCA / ORCA F)
Wedge piece (ORCA F)
Bolt right (ORCA F)
Bolt left (ORCA F)
Changing the seat plate
1. Starting from one side press in clips A and simutanoeusly pull out the side flap slowly.
2. Repeat step 1 for the opposite side flap.
Part number
Qty.
1563010
1
1563012
1
16679
2
1471055
2
1471058
1
1471059
1
1
en
XXXXXX
=1
8m
n
i
M
a
d
e
in
xxVD
C
=
2
m
n
i
G
e
m
r
a
ny
xxV A
XXX kg
IPXX
MD
YYYY -MM
xx,x kg
XXXXXXX
S N
( 0 1 ) 0 4 0 2 8 6 9 8 1 2 3 4 5 6 ( 2 1 ) X X X 2 1 0 0 0 0 1