Aquatec AquaPro All in One 2000 Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Aquatec AquaPro All in One 2000. Aquatec AquaPro All in One 2000 8 pages. Complete pond and filter system

Imprimer la page
Problem
Water Pump Not
Working
Water Pump is noisy
UVC Lamp not
working
Low Voltage UV Globe 9W
AQP All in One 2000 Instructions.indd 6
Reason
No Power
Sponges and filter media
blocked with sludge
Impellor is blocked with
sludge or limescale
Running without sufficient water
Blocked Impellor chamber or ceramic
shaft is broken
Blockage in pump
Impellor & Shaft worn out
Impellor broken
Water valve closed on the outlet
Unit inlet is blocked or the water
pump inlet is blocked
UVC Globe blown or
Quartz Sleeve broken
Connection of the UVC Globe
not sufficient
Description
Impellor & Shaft
Quartz Glass Sleeve
Sponge Filter
Complete Fountain Kit
12V Transformer 72VA
Solution
Check that the plug is connected
and turned on
Clean the sponges and filters
Clean the Impellor as per
the instructions
Submerse the equipment underwater
then plug in. Refill if necessary.
Clean the Impellor. Check for ware.
Replace if necessary.
Clear the blockage
Replace Impellor & Shaft
Replace Impellor
Open the valve and allow
water to flow
Clear all blockages
Replace as necessary
Push UV Globe in firmly until you
hear a click sound
Product Code
11AQ111
11AU177
11AQ211
11AQ311
11AQ411
04ST072
23/09/2015 6:35 am