Panasonic AW-HEA10WEJ Manuel d'installation et d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Panasonic AW-HEA10WEJ. Panasonic AW-HEA10WEJ 40 pages. Control assist cameras
Également pour Panasonic AW-HEA10WEJ : Manuel d'utilisation (34 pages)
Imprimer la page
How to install and connect the unit (continued)
2.
Attach mount bracket B onto the installation surface.
• Use supplied bracket mounting screws A (M4 x 10 mm, binder-head).
<NOTE>
• Use only the screws supplied with the unit. Do not use any other screws such as wood screws, nails, etc.
3.
Attach the drop‑prevention wire.
• Attach the supplied drop-prevention wire to the unit with the drop-prevention wire mounting screw (M4 x 8 mm).
• Loop the circle part of the wire around the hook of the mount bracket.
• Pull the drop-prevention wire, and check that it has been attached securely to the hook.
Drop‑prevention wire
<NOTE>
• The drop-prevention wire was designed under the assumption that it will support the weight of the unit and HD integrated camera hanging. Do not
apply any additional load to it.
10
Bracket mounting screws A
(M4 x 10 mm, binder‑head)
End of hook
Loop the circle part of the drop‑
A
prevention wire around the end
of the hook part of the mount
bracket.
Drop‑prevention
wire mounting
screw (M4 × 8 mm)
Drop‑prevention
wire
B Pull the wire, and check that
it is securely attached to the
hook.