Panasonic AW-HEA10WEJ Manuel d'installation et d'utilisation - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Panasonic AW-HEA10WEJ. Panasonic AW-HEA10WEJ 40 pages. Control assist cameras
Également pour Panasonic AW-HEA10WEJ : Manuel d'utilisation (34 pages)
Imprimer la page
How to mount the HD integrated camera (continued)
2.
Mount the HD integrated camera.
• Align the status display lamp of the HD integrated camera and the hole for checking the positioning of the unit.
• Align the bottom insertion holes of the HD integrated camera with the camera insertion protrusions of the unit and then push the camera and unit
together firmly and rotate the camera by approx. 20° in the direction of the arrow.
• Secure the HD integrated camera and unit together with the camera mounting screw supplied with the HD integrated camera.
Hole for checking
the positioning
On the unit:
Camera insertion
protrusions (3
places)
On the camera:
Bottom insertion
holes (3 places)
Status display lamp
<NOTE>
• Do not do this work while holding the camera head since doing so may result in malfunctioning of the unit.
• Use only the screws supplied. Do not use any other screws.
• Check that the unit has been mounted securely with no tilting or wobbling.
• Be sure to secure the HD integrated camera and unit together with the camera mounting screw supplied with the HD integrated camera before
connecting any of the cables.
3.
Check the mounting.
Check out the following points.
• The camera mounting screw supplied with the HD integrated camera must be attached
properly.
• The unit must not tilt, and it must be mounted exactly.
• The unit must be securely installed.
• The pedestal part of the HD integrated camera must not rotate even when an attempt is
made to turn it.
Camera mounting screw (M3 × 6 mm)
(supplied with the HD integrated camera)
Approx.
20°
15