Panasonic AW-RP150 Manuel d'utilisation

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic AW-RP150. Panasonic AW-RP150 7 pages.

Operating guide for AW-RP150 Ver2

This document is described functions of AW-RP150 SYSTEM VERSION Ver 2.00-00-0.09. Please

see also the operating instructions of ROPs.

No.3 ：A ROP setting menu is added so that the selected camera at the AW-RP150

can be activated on the connected ROP.

AK-HRP1000/AK-HRP1005 ver.4.80-00-0.03 or higher

To use the ROP linkage function, PORT number of RP150 has to be same as one of ROP.

＜Setting ROP＞

【MENU】＞AW CONTROLLER LINK

Set up the PORT No. for RP150 to "RECEIVE PORT" and execute "INFO UPLOAD".

Set "AW CONT LINK" to ON.

＜Setting RP150＞

【MENU】 SYSTEM ＞ ROP LINK

Set up "ROP IP" and "PORT" for ROP. And execute "UPLOAD".

Assign "CAMSEL" for RP150 and "ROP CAM" for ROP.

Target CAM No. can be set at "ROP CAM" against CAMSEL in RP150.

Initial setting : CAM1 –CAM99 is 1 – 99

In case of no assigned CAMERA, please set it "NON".

When "AW LINK" is turned on, RP150 starts to communicate to ROP.

CAM100 - CAM200 is NON