Diamond Kinetics SwingTracker DKST02 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Diamond Kinetics SwingTracker DKST02. Diamond Kinetics SwingTracker DKST02 14 pages.
Également pour Diamond Kinetics SwingTracker DKST02 : Manuel de l'utilisateur (11 pages)
Imprimer la page
current swing session. You must select a batters stance, bat, session type and Load
Position to take swings. The SwingTracker app will guide you to set your L oad
Position.
We recommend setting your usual Load Position. This will enhance the accuracy of
your data. You should periodically reset your Load Position to get the most accurate
analysis.
DK Tip: Here are a few tips to capture the best data:
● Get to your natural load point
● Pause the bat for a second or two before taking a swing
Do not move the bat excessively when capturing swings
●
When selecting your b at, you can select an existing bat or A dd A Bat . Once you select
all of the details of your new bat, select S ave to use the bat in future batting sessions. If
you are using a 'smart' bat make sure to set that as your bat and that you are using an
embedded sensor.
DK Tip: If you do not see your bat Model or Manufacturer listed, select other.
If you see
S ensor Not Connected
paired to your phone. If you see a
your phone and allow SwingTracker access to your video.
Additional details are provided in the A dvanced Settings o ption listen in the session
setup.
Once entering all of the Session Setting information, select C ONTINUE a t the bottom
of the Session Settings screen.
You can now Swing Away!
When taking swings your swings will automatically appear in the swing session. You
will have several different views in which you can see your current swings in. At the
bottom right-hand corner of the screen you should see four icons stacked on top of
each other.. The top icon (Field) is D amage Potential . The second icon is 3 D V iew .
You can switch between these views while either in your current session or later in
history.
, double check your Bluetooth that your sensor is
V ideo Unavailable
m essage go into the settings on