HP 1810-48G Quickspecs - Page 22
Parcourez en ligne ou téléchargez le pdf Quickspecs pour {nom_de_la_catégorie} HP 1810-48G. HP 1810-48G 25 pages. Smart-managed, fixed-configuration gigabit and fast ethernet layer 2 switches
Également pour HP 1810-48G : Spécifications (32 pages), Quickspecs (32 pages), Fiche technique (11 pages), Manuel d'installation rapide (5 pages)
Imprimer la page
QuickSpecs
Accessory Product Details
HP 50 m PremierFlex
HP 50 m PremierFlex
HP 50 m PremierFlex
HP 50 m PremierFlex
OM3+ LC/LC Optical
OM3+ LC/LC Optical
OM3+ LC/LC Optical
OM3+ LC/LC Optical
Cable
Cable
Cable (BK843A)
Cable
HP X410 1U Universal 4-
HP X410 1U Universal 4-
HP X410 1U Universal 4-
HP X410 1U Universal 4-
post Rack Mounting Kit
post Rack Mounting Kit
post Rack Mounting Kit
post Rack Mounting Kit
(J9583A)
Notes
Notes
Notes
Notes
Services
Services
Services
Services
Notes
Notes
Notes
Notes
Services
Services
Services
Services
DA - 13447
Worldwide — Version 9 — October 28, 2011
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at
www.hp.com/networking/services
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
The rack mounting kit supports the 1U, full width switches in the following
switch series and the power supply: V1810 Series, E2510 Series, E2520
Series, E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the
E620 Power Supply This universal rack mounting kit is design to fit the
following racks: HP 10K 10642, HP 10K 10842, Panduit CN, Panduit CS,
Wrightline Vantage S2, APC Netshelter 600mm, and APC Netshelter
800mm. It may well fit many other brands and models too.
Refer to the HP website at
www.hp.com/networking/services
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 1810 Switch Series
HP 1810 Switch Series
HP 1810 Switch Series
HP 1810 Switch Series
for details on the
for details on the
Page 22