HP 316095-B21 - StorageWorks Edge Switch 2/24 Manuel - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 26 pages. Edge switch release notes
Également pour HP 316095-B21 - StorageWorks Edge Switch 2/24 : Manuel de mise à jour (9 pages), Manuel (41 pages), Manuel (40 pages), Note de mise à jour (32 pages), Note de mise à jour (27 pages), Note de mise à jour (27 pages), Note de mise à jour (25 pages), Manuel d'instructions d'installation (24 pages), Note de mise à jour (23 pages), Note de mise à jour (23 pages), Note de mise à jour (22 pages), Note de mise à jour (23 pages), Note de mise à jour (19 pages), Note de mise à jour (19 pages), Note de mise à jour (18 pages), Manuel d'instructions (17 pages), Note de mise à jour (17 pages), Instructions de mise à niveau (16 pages), Manuel d'instructions (16 pages), Manuel d'instructions d'installation (16 pages), Note de mise à jour (16 pages), Note de mise à jour (17 pages), Note de mise à jour (17 pages), Note de mise à jour (11 pages)

Imprimer la page
HP 316095-B21 - StorageWorks Edge Switch 2/24 Manuel
Glossary
hot-swapping
Removing and replacing a device's components while the device continues to operate normally.
hub
In Fibre Channel protocol, a device that connects nodes into a logical loop by using a physical
star topology. In an Ethernet system, a device used to connect the HAFM server and the
directors it manages.
IML
See
initial machine
load.
inband management
Management of the director or switch through a Fibre Channel connection to a port card. See
also
out-of-band
management.
information message
Software message that indicates to a user that a function is performing normally or has
completed normally. See also
error message
and
warning
message.
initial machine load
(IML) — Hardware reset for all installed CTP cards on the director. It does not affect other
hardware. It is initiated by pushing the white button on a director's CTP card.
initial program load
(IPL) — Process of initializing the device and causing the operating system to start. Initiated
through a menu in the Product Manager, this option performs a hardware reset on the active
CTP only.
initial program load configuration
(IPL configuration) — In S/390 mode, information containing default configurations stored in a
director or switch's nonvolatile memory. The director or switch loads the file for operation when
powered on.
input/output configuration
The collection of channel paths, control units, and I/O devices that attaches to the S/390 or
zSeries processor.
input/output configuration program
A program that defines all available I/O devices and channel paths to an IBM S/390 or zSeries
processor system. Replaced by the Hardware Configuration Definition Program starting with
MVS/ESA Version 4.0.
interface
Hardware, software, or both hardware and software that link systems, programs, or devices.
internet protocol address
(IP address) — Unique string of numbers (in the format xxx.xxx.xxx.xxx) that identifies a
device on a network.
Directors and Edge Switches Glossary
15