HP 316095-B21 - StorageWorks Edge Switch 2/24 Note de mise à jour - Page 20

Parcourez en ligne ou téléchargez le pdf Note de mise à jour pour {nom_de_la_catégorie} HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 27 pages. Edge switch release notes
Également pour HP 316095-B21 - StorageWorks Edge Switch 2/24 : Manuel de mise à jour (9 pages), Manuel (41 pages), Manuel (40 pages), Note de mise à jour (32 pages), Note de mise à jour (27 pages), Manuel (26 pages), Note de mise à jour (25 pages), Manuel d'instructions d'installation (24 pages), Note de mise à jour (23 pages), Note de mise à jour (23 pages), Note de mise à jour (22 pages), Note de mise à jour (23 pages), Note de mise à jour (19 pages), Note de mise à jour (19 pages), Note de mise à jour (18 pages), Manuel d'instructions (17 pages), Note de mise à jour (17 pages), Instructions de mise à niveau (16 pages), Manuel d'instructions (16 pages), Manuel d'instructions d'installation (16 pages), Note de mise à jour (16 pages), Note de mise à jour (17 pages), Note de mise à jour (17 pages), Note de mise à jour (11 pages)

SNMP requests can be received in either 3.0 or 3.1 of the Fibre Alliance (FA) MIB, and

the switch responds in the same version. The switch can also be conﬁgured to use a

speciﬁc version for traps generated by the switch.

Zoning limitations

With ﬁrmware 06.00.00 and later, you have the ability to conﬁgure large zone sets,

including up to 1024 zones and 1024 end ports in a single zone set.

the supported limits for the edge switches and directors.

Table 3 Zoning parameters supported limits

Number of zone members in a zone

Number of zones in a zone set

Number of unique zone members in a zone set

Total number of zone members in a zone set (where a zone

member can be in multiple zones)

Characters per zoning name

Number of unique zone members in HAFM Zoning Library

Number of zones in HAFM Zoning Library

Number of zone sets in HAFM Zoning Library

Number of end ports

Number of devices supported (including loop devices)

Using the same ﬁrmware

All directors and edge switches in the same fabric should have the same ﬁrmware level

installed—whether 1 Gbps or 2 Gbps capable, this ﬁrmware operates correctly.

The recently released Edge Switch 2/12 had an interim ﬁrmware speciﬁc for the Edge

Switch 2/12, 05.05.00-12. This ﬁrmware cannot be used for any other edge switch

or director. This interim version is compatible with the M-Series ﬁrmware 05.02.00-13

used for the rest of the M-Series fabric products. The ﬁrmware 07.01.02-4 is a common

ﬁrmware for all the M-Series fabric products, including the Edge Switch 2/12.

Firmware 06.02.00-22 provides support for second-generation Edge Switch 2/12 and

Edge Switch 2/24 switches. This is the minimum M-Series ﬁrmware supported on the

second-generation Edge Switch 2/12 and Edge Switch 2/24.

Zoning parameter

Table 3

shows

Maximum value

2048

1024

2048

4096

2048

1024