HP 316095-B21 - StorageWorks Edge Switch 2/24 Note de mise à jour - Page 14

Parcourez en ligne ou téléchargez le pdf Note de mise à jour pour {nom_de_la_catégorie} HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 23 pages. Edge switch release notes
Également pour HP 316095-B21 - StorageWorks Edge Switch 2/24 : Manuel de mise à jour (9 pages), Manuel (41 pages), Manuel (40 pages), Note de mise à jour (32 pages), Note de mise à jour (27 pages), Manuel (26 pages), Note de mise à jour (27 pages), Note de mise à jour (25 pages), Manuel d'instructions d'installation (24 pages), Note de mise à jour (23 pages), Note de mise à jour (23 pages), Note de mise à jour (22 pages), Note de mise à jour (19 pages), Note de mise à jour (19 pages), Note de mise à jour (18 pages), Manuel d'instructions (17 pages), Note de mise à jour (17 pages), Instructions de mise à niveau (16 pages), Manuel d'instructions (16 pages), Manuel d'instructions d'installation (16 pages), Note de mise à jour (16 pages), Note de mise à jour (17 pages), Note de mise à jour (17 pages), Note de mise à jour (11 pages)

HAFM upgrade required for firmware 09.08.03

Consider the following HAFM requirements for firmware 09.08.03:

If you are using the 1U rack-mount HAFM Appliance to manage the Edge Switch or Director, the

minimum HAFM version required is 08.09.01. This HAFM software is provided on the HP Stor-

ageWorks ha-fabric manager documentation and software CD (Part Number 516-000024-720).

This minimum version of HAFM allows you to manage Edge Switches or Directors running firmware

version 09.08.03. However, to use all the new features and enhancements, upgrade to EFCM

software 09.07.00. To migrate from HAFM to EFCM, you must first upgrade to HAFM 08.09.01.

An upgrade kit to HAFM 08.09.01 is available (Part Number A7490A) for owners of a licensed

version of HAFM. This HAFM upgrade is also available on the HP website:

http://h18006.www1.hp.com/storage/networking/index.html

Select Retired Products, navigate to your switch model, and then select Download drivers and

software.

Alternatively, you can perform the firmware upgrade directly to the Edge Switch or Director using

the switch's HAFM Basic management interface.

Contact your HP-authorized service representative to obtain a new HAFM version or to confirm

compatibility with devices in your SAN before upgrading to this firmware.

For more information on upgrading software versions, see the HP StorageWorks HA-Fabric Manager

user guide.

M-series and B-series switch interoperability

For details on compatible firmware versions, management software EFCM or Data Center Fabric

Manager (DCFM) Enterprise versions, and other requirements for M-series and B-series switch

interoperability, see the latest application notes under Application Notes > Fabric Interoperability,

available on the following HP website:

http://www.hp.com/storage/spock

Important information

This section provides information that you should consider before using Edge Switches or Directors

running firmware 09.08.03.

SNMP reports wrong address

If using SNMP, fcConnUnitLinkAgentAddressY should report the IP address of the HAFM or

EFCM server if being managed by the application, or if not, should report the IP address of a

neighboring switch in the fabric. Instead, a value of NULL or "0" is returned.

Master log does not display port number

For port offline and online messages in the Master log in HAFM or EFCM, the switch port number,

switch WWN, and connected device (node) WWN should be included in the message. However,

the switch WWN appears as the node WWN, and the node WWN is not included.