AQUATECH Delphin Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AQUATECH Delphin. AQUATECH Delphin 6 pages. Housing
Également pour AQUATECH Delphin : Manuel d'instruction (5 pages)
Imprimer la page
*If you do notice any amount of water in your Sport
Housing take it apart dry it completely out and
water test again. If the problem persists please
contact AquaTech directly at
You are now ready to enter the water, but always be
conscious of your equipment and please check your
new Sport Housing periodically to make sure no
water has seeped in.
OVERVIEW
Thank you for purchasing your AquaTech Sport
Housing. AquaTech Sport Housings are designed for
shallow water and surface use only. They have been
tested and rated to 10 meters (33 feet) however, a
working depth of 5 meters (15 feet) should not be
exceeded for more than 5 minutes. Our products are
NOT designed for a diving application.
Your new Sport Housing has been water tested,
electrical tested, control tested and is ready for use.
However, please inspect the product before use as
there might have been damage done in shipping.
Also please familiarize yourself with the product
before going in the water.
FEATURES
Front Compression O-ring - seated in the groove
below the front threads. Will seal against the base
of the port when screwed in. Always make sure
this Compression O-ring is properly seated in the
groove before screwing on the port. Do NOT use
O-ring Grease on this O-ring.
Back Main O-ring - seated in the groove between
the main body housing and the Back Plate. The Back
Plate is the clear acrylic piece with the controls for
your camera. Always make sure the Main O-ring
is seated properly in the groove before clamping
down the back plate. Do NOT use O-ring Grease on
this O-ring.
Shutter Release Assembly - this mechanical control
is located on the top right of the Sport Housing
and directly hits the shutter release button on your
camera.
Camera Plate - this part bolts to the bottom of your
camera and slides into the AquaTech Manny Mount
located on the inside of your Sport Housing. The
Camera Plate also can be used to hold your camera
on different Arca Swiss type Quick Release Systems.