HP ProCurve 1600M Manuel d'installation rapide

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} HP ProCurve 1600M. HP ProCurve 1600M 2 pages. Redundant power supply
Également pour HP ProCurve 1600M : Fiche technique (12 pages), Lisez-moi d'abord (8 pages), Manuel du réviseur (27 pages), Manuel complémentaire (2 pages), Manuel complémentaire (2 pages), Manuel d'installation (28 pages), Manuel d'installation (36 pages), Manuel d'installation (28 pages), Manuel d'installation rapide (4 pages), Manuel de l'utilisateur (8 pages), Supplément au manuel (28 pages), Lisez-moi d'abord (16 pages), Installation et retrait (2 pages), Manuel d'installation (12 pages), Manuel de planification et de mise en œuvre (40 pages), Instructions de démontage du produit en fin de vie (2 pages), Manuel d'installation (46 pages), Manuel de diagnostic (2 pages), Instructions de démontage (2 pages)

Imprimer la page
HP ProCurve 1600M Manuel d'installation rapide
HP ProCurve Switch Quick Setup Guide
These images are examples only. Your switch may look a little different.
➊
Unpack and check included parts:
• Switch
• Switch Quick Setup Guide
• Read Me First
• Safety and Regulatory booklet
• Customer Support/Warranty booklet
• Console cable
• Accessory kit
• Power cord
➋
Prepare for installation.
To avoid personal injury or product damage, review
the installation guidelines on the next page.
➌
Verify selftest by connecting the power cord.
Test LED
Power and
Fault LEDs
➍
Install mounting brackets.
➎
Mount the switch and connect the power cord.
➏
➐
Port LEDs
By default, the switch is configured to acquire an IP address config-
uration from a DHCP or Bootp server.
For more information on configuration and remote management, see
the Management and Configuration Guide for your switch, which is
on the ProCurve Web site at
➑
For more installation information refer to the Installation
and Getting Started Guide for your product, located on
the HP ProCurve Web site at:
www.procurve.com/manuals.
Note: Before installing the switch in a rack, check the
Installation and Getting Started Guide for specific rack
installation instructions.
(Optional) Connect console cable.
Configure (minimal configuration).
www.procurve.com/manuals.
Connect network cables.
RJ-45
connector
Console
cable
To PC
Fiber cable
connector