HP ProCurve 6120G/XG Instructions d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} HP ProCurve 6120G/XG. HP ProCurve 6120G/XG 4 pages. Ethernet blade switch
Également pour HP ProCurve 6120G/XG : Instructions d'installation (4 pages), Questions fréquemment posées (4 pages), Brochure & Specs (17 pages)
Imprimer la page
switch CLI, accessing it via serial interface attached to OA
and/or USB interface attached to the blade.
When using optional transceiver modules or direct attach
cables, order the modules and cables separately. For more
information, see the QuickSpecs on the HP website
(http://www.hp.com/go/bladesystem/interconnects).
For more information on BladeSystem port mapping, see the
HP BladeSystem enclosure setup and installation guide that
shipped with the enclosure.
For the most current product information, see the release notes
at http://www.hp.com/go/bladesystem/documentation.
Firmware requirements
Always install the most current firmware or software for the following
items:
Server blade system ROMs
Ethernet mezzanines
HP BladeSystem Onboard Administrator
HP ProCurve blade switch
For additional information on required firmware or software versions
and to download firmware or software updates, see the HP website:
1.
Go to http://www.hp.com/#Support.
2.
Click the "Download drivers and software" radio button.
3.
Enter "6120XG" in the text box and click "Go".
4.
Click the link for your operating system.
5.
Download the appropriate software or firmware.
Front Panel
Item
Description
1
Port 17 (10GBASE-CX4) *
2
Console port (USB 2.0 mini-AB connector)
3
Clear button
4
Port 17 SFP+ (10-GbE) slot *
5
Port 18 SFP+ (10-GbE) slot
6
Port 19 SFP+ (10-GbE) slot
7
Port 20 SFP+ (10-GbE) slot
8
Port 21 SFP+ (10-GbE) slot
9
Port 22 SFP+ (10-GbE) slot
10
Port 23 SFP+ (10-GbE) slot *
11
Port 24 SFP+ (10-GbE) slot *
12
Reset button (recessed)
* Dual-personality port. See explanation below.
†
Supports 10GBASE-SR SFP+, 10GBASE-LR SFP+, 10GBASE-LRM
SFP+, 1000BASE-T SFP, 1000BASE-SX SFP, and 1000BASE-LX SFP
pluggable optical transceiver modules.
Dual-personality ports
†
†
†
†
†
†
†
†
Port 17 consists of a CX4 port multiplexed with an SFP+ port. Only
one may be active. The SFP+ port takes precedence: if it contains a
module, it is the active port and the CX4 port is inactive.
Ports 23 and 24 are each multiplexed with inter-switch link ports
on the blade switch's backplane. Either the SFP+ port on the front
panel or the backplane port can be active, but both can not be
active at the same time. The SFP+ port on the frontplane takes
precedence: if it contains a module, it is the active port and its
corresponding backplane port is inactive. Refer to the Installation
and Getting Started Guide for more information.
LEDs
Item LED description
1
Module locator
(UID)
2
Module status
(health)
3
Port 17 status
(10GBASE-CX4)
4
Port 17 activity
(10GBASE-CX4)
5
–
Port 17
22 status
(SFP+ connector)
6
–
Port 23
24 status
7
–
Port 23
24
multiplexed port
status
8
–
Port 23
24 activity
9
–
Port 17
22 activity
10
Port 17 multiplexed
port status
Status
Blue = Module ID selected
Off = Module ID not selected
Green = Normal operation
Amber = Fault
Off = Power off
Green = Port is connected to the
network.
Amber = Fault
Off = Not connected
Green flashing = Activity
Green = Port is connected to the
network.
Amber = Fault
Off = Not connected
Green = Port is connected to the
network.
Amber = Fault
Off = Not connected
Green = Frontplane port is active.
Internal (backplane) link is inactive.
Off = Frontplane port is inactive.
Internal (backplane) link may be
active.
Green flashing = Activity
Green flashing = Activity
Either the CX4 port or the SFP+ port
may be active, but not both.
Green = Port is active.
Off = Port is inactive.