HP ProCurve J4907A Manuel de configuration - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} HP ProCurve J4907A. HP ProCurve J4907A 2 pages. With software release e.08.3x

Imprimer la page

Saving the Configuration After Installing or Exchanging a Module

The following cases automatically result in a change to the running-configuration on your switch:

If you replace a module with another module of a different type and then reboot the switch

If you install a module in a slot that has not previously been used (including when you install

a module and apply power to the switch for the first time)

If you want to save such changes to permanent memory (startup-configuration), use the write memory

command in the switch console. This causes the switch to use the new hardware configuration for

subsequent reboots. (The switch always reboots from the startup-configuration.)

If you do not save the hardware changes to the startup-configuration, you will be prompted with the

following message the next time you use the reboot or reload commands:

Do you want to save the current configuration [y/n] ?

For more information on switch memory, including the startup-config and running-config memories,

refer to the Management and Configuration Guide on the Documentation CD-ROM included with

your switch. For the latest version of HP switch documentation, visit

hpprocurve. (Click on Technical support, then Product manuals.)

For more information regarding the software documentation for the PoE module refer to either of

the following:

Release Notes: Version E.08.30 or later for the HP ProCurve series 5300xl Switches (part

number 5990-6004).

HP ProCurve Series 5300xl Management and Configuration Guide (part number 5990-

6050, edition 2, March 2004 or later), in chapter titled "Power Over Ethernet (PoE) Operation.

For the latest version of this documentation, visit http://www.hp.com/go/hpprocurve. (Click on Tech

nical support, then Product manuals, then HP ProCurve 5300xl Series.) Under Current Manuals, click on

one of the following links:

Release Notes: Version E.08.30 for the HP ProCurve Series 5300xl Switches

- or-

HP ProCurve Series 5300xl Switches Management and Configuration Guide (Edition 2, March 2004)

The Information contained herin is subject to

change without notice.

http://www.hp.com/go/

Part Number: 5990-6077

May 2004

Printed in Singapore

*5990-6077*