HP StorageWorks 2/24 - Edge Switch Note de mise à jour - Page 12

Parcourez en ligne ou téléchargez le pdf Note de mise à jour pour {nom_de_la_catégorie} HP StorageWorks 2/24 - Edge Switch. HP StorageWorks 2/24 - Edge Switch 16 pages. Fw 04.01.02 and sw 06.03.01 ha-fabric manager release notes
Également pour HP StorageWorks 2/24 - Edge Switch : Note de mise à jour (32 pages), Note de mise à jour (27 pages), Manuel (26 pages), Note de mise à jour (19 pages), Note de mise à jour (17 pages), Note de mise à jour (10 pages)

Imprimer la page

HP StorageWorks 2/24 - Edge Switch Note de mise à jour

Important Information

Zoning Limitations

Firmware version 05.01.00-24 includes the ability to configure large zone sets,

including up to 1024 zones and 1024 end ports in a single zone set.

the supported limits for the edge switches and directors.

Note:

conforming to zoning rules will be restricted to their assigned zones.

Table 2: Zoning Parameters Supported Limits

Number of end ports

Unique zone members

Members per zone

Zones

Number of zone sets

Maximum devices supported

Note:

32 characters. On all edge switches and directors except the Director 2/140, the

maximum number of zones decreases if full 64 character names are used. The

supported limits are based on two members per zone.

Zone set sizes are affected by the number of zones in the zone set, the length of

each zone name, the number of members in each zone, and the Interoperability

mode of the fabric. Please consult with HP Professional Services or your support

representative if you have questions regarding specific zone set configurations.

Using the Same Firmware

All switches and directors in the same fabric should have the same FW level

installed—whether 1 Gbps or 2 Gbps capable.

Hard Zoning will be enforced upon firmware initialization. Devices not

Zoning Parameter

The supported number of zones is based on a zone name with a maximum of

Maximum Value

1024

HA-Fabric Manager Release Notes

Table 2

shows