HP StorageWorks 7110 - Virtual Array Utilisation du manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Utilisation du manuel pour {nom_de_la_catégorie} HP StorageWorks 7110 - Virtual Array. HP StorageWorks 7110 - Virtual Array 34 pages. Private loop (hubs/direct connect)
Également pour HP StorageWorks 7110 - Virtual Array : Instructions de mise à niveau (12 pages), Instructions (4 pages), Manuel (4 pages), Manuel (4 pages), Instructions d'installation (2 pages), Manuel (2 pages), Manuel (1 pages), Manuel (1 pages)

Imprimer la page

HP StorageWorks 7110 - Virtual Array Utilisation du manuel

ARRAYINDEX

Selects the array to be tested

Syntax

arrayindex [arrayindex]

Description

This command sets the ARRAYINDEX variable to an array controller's device index number. The

array controller is chosen from the numbers displayed by the dispmap command. The

ARRAYINDEX variable is an index to the array to be tested, while the LOOPPAIR,

ENCLOSURE, and SLOT variables select the appropriate component within the array.

Changing the value of ARRAYINDEX causes the value of LOOPPAIR, ENCLOSURE, and SLOT

to be set to NOT SET. You must set these variables to an appropriate value.

Options

arrayindex – A device index number returned by the dispmap command.

Examples

To display the current value of ARRAYINDEX:

VADIAG> arrayindex

ArrayIndex: 0

To set the value of ARRAYINDEX to the array controller whose device index number is 1.

VADIAG> arrayindex 1

ARRAYINDEX