HP StorageWorks 8/8 - SAN Switch Note de mise à jour - Page 17

Parcourez en ligne ou téléchargez le pdf Note de mise à jour pour {nom_de_la_catégorie} HP StorageWorks 8/8 - SAN Switch. HP StorageWorks 8/8 - SAN Switch 43 pages. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Également pour HP StorageWorks 8/8 - SAN Switch : Note de mise à jour (30 pages), Note de mise à jour (29 pages), Note de mise à jour (32 pages)

Imprimer la page

HP StorageWorks 8/8 - SAN Switch Note de mise à jour

Fabric OS feature compatibility in native connectivity modes

Some Fabric OS features are not fully supported when operating in the native connectivity modes for

deployment with M-EOS-based products. All HP StorageWorks models that are supported by Fabric

OS 6.2.0b support both interopmodes 2 and 3, with the exception of the HP StorageWorks 4/32

SAN Switch.

NOTE:

HP may not support all of these switches in this mode. See Merging Fabrics based on M-Series and

B-Series FC switches" application note available at http://www.hp.com for specific support in

interopmodes 2 and 3.

Table 5

specifies the support of various Fabric OS features when operating in either interopmode 2

(McDATA Fabric Mode) or interopmode 3 (Open Fabric Mode) with Fabric OS 6.2.0b.

Table 5 Feature support in interopmodes 2 and 3

L2 Fabric OS Hot Code Load

Fabric OS Hot Code Load with FCR

Zone Activation Support

Traffic Isolation Zones

Frame Redirection (devices attached to Fabric OS)

Frame Redirection (devices attached to M-EOS)

Frame Redirection over FCR

FCR Fabric Binding (route to M-EOS fabric with Fabric Binding)

L2 Fabric Binding

DCC policies

SCC policies

E/Ex_Port Authentication

ISL Trunking (frame level)

Dynamic Path Selection (DPS, exchange-based routing)

Dynamic Load Sharing (DLS, port-based routing)

Virtual Channels (VC RDY)

Fabric OS Features (supported in interopmode 0)

IM = interopmode

HP StorageWorks Fabric OS 6.2.0b release notes

Fabric OS 6.2.0x

IM 2

IM 3

Yes