HP StorageWorks 8B - FC Entry Switch Manuel de l'utilisateur - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 44 pages. Fabric os release notes version 3.0.1b
Également pour HP StorageWorks 8B - FC Entry Switch : Manuel de mise à jour (9 pages), Manuel d'instructions d'installation (20 pages), Manuel de l'utilisateur (22 pages), Notes de mise à jour du micrologiciel (14 pages), Manuel d'installation (14 pages), Note de mise à jour (26 pages), Manuel (50 pages), Manuel de l'utilisateur (44 pages), Manuel de l'utilisateur (38 pages), Manuel de l'utilisateur (38 pages), Manuel de l'utilisateur (37 pages), Manuel de l'utilisateur (30 pages), Note de mise à jour (16 pages)

Zoning and Partnering with QuickLoops

To define a QuickLoop zone, specify the list of members to be included and assign a unique zone

name. A QuickLoop zone name must be a unique alpha-numeric string beginning with an alpha

character. The underscore character ( _ ) is allowed and zone names are case-sensitive. For

example, Zone1 is not the same name as zone1.

To create a QuickLoop zone, specify QuickLoop zone members by looplet, by AL_PA, or by

combination of the two.

To specify by looplet, specify the QuickLoop zone name, in quotes, and the physical ports to be

included, in quotes. For example:

"QLZoneName", "0,0; 0,1; 2,6; 2,7; 2,8"

To specify by AL_PA, specify the QuickLoop zone name, in quotes, with the QuickLoop name, and

desired AL_PAs in quotes. All AL_PAs must be associated with a QuickLoop name. For example:

"QLZoneName", "qloop1[01,02,04,e0,e1,e2]"

To specify a combination of looplet and AL_PA, for example:

"QLZoneName", "0,2; 0,3; qloop1[ca,cb,e1,e2]"

Define QuickLoop Zone Configuration

A QuickLoop zone configuration is a group of QuickLoop zones that are enforced whenever that

zone configuration is enabled.

To define a QuickLoop zone configuration, assign a zone configuration name and specify the

QuickLoop zones to be included, by zone name. The QuickLoop names of the QuickLoop zones

must also be included in the zone configuration. For an example, see Chapter 5, Detailed Zoning

Examples.

A QuickLoop zone configuration name must be a unique alpha-numeric string beginning with an

alpha character. The underscore character ( _ ) is allowed and zone configuration names are

case-sensitive. For example, QLConfig_1 is not the same name as qlconfig_1.

To enable a QuickLoop zone configuration that has been established using the cfgCreate

command, select the configuration to be enabled and use the cfgEnable command.

4-4

Zoning User's Guide