HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuel d'instructions d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 20 pages. 1u rackmount tape enclosure
Également pour HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM : Instructions d'installation (2 pages), Manuel d'installation (14 pages), Note de mise à jour (14 pages), Instructions d'installation (2 pages), Manuel de référence (46 pages)

Imprimer la page
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuel d'instructions d'installation
Installing the Switch in a Rack Using the SAN Switch
Rack Mount Kit
This section provides instructions for installing the SAN Switch 2/32, SAN
Switch 2/16, or SAN Switch 2/8 in an HP System/e rack, or in an HP 9000 Series
or comparable EIA rack using the SAN Switch Rack Mount Kit, part number
331148-B21.
Figure 1: SAN Switch 2/16 rack-mounted switch
Note:
The following items are required to install the switch in a rack:
8
The Rack Mount Kit installation requires one technician to install a SAN switch.
SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8
Power cables
#2 Phillips screwdriver
7/16-inch wrench or socket
The SAN Switch Rack Mount Kit rails and rail mounting hardware listed
next:
SAN Switch Rack Mount Kit Installation Instructions