HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuel de référence - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 46 pages. 1u rackmount tape enclosure
Également pour HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM : Instructions d'installation (2 pages), Manuel d'instructions d'installation (20 pages), Manuel d'installation (14 pages), Note de mise à jour (14 pages), Instructions d'installation (2 pages)

Imprimer la page
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuel de référence

One drive per SCSI bus

Use the configuration shown in Figure 14 when connecting each drive to a separate SCSI bus.
Figure 13
One drive per SCSI bus
1
Tape drive 1
3
SCSI bus 1 cable, SCSI connector
nearest terminator is used for drive 1
5
SCSI ID cables, one for each tape drive
CAUTION:
To prevent possible data errors, when there is only one drive on a SCSI bus that drive
must be connected to the SCSI port closest to the terminator.
CAUTION:
To avoid damaging the equipment due to electrostatic discharge, be sure to review and
practice the procedures in Appendix B before handling the tape drives.
18
Tape Drive Installation
5
4
3
1
2
2
4
15105
Tape drive 2
SCSI bus 2 cable, SCSI connector
nearest terminator is used for drive 2