HP StorageWorks XP10000 - Disk Array Manuel de configuration - Page 18

In XP Command View Advanced Edition, LUN mapping includes:

•

Configuring ports

•

Creating storage groups

•

Mapping volumes and WWN/host access permissions to the storage groups

For details, see HP StorageWorks XP LUN Manager User's Guide or XP Command View Advanced

Edition Device Manager Web Client User's Guide.

Record the LUNS and their ports, WWNs, nicknames, and LDEVs. This information will be used later

to verify host and device configuration.

Verifying disk array device recognition

For the NonStop host to recognize disk devices, the disk devices must first be added, configured, and

started using the installation procedure described in chapter 2 of the Fibre Channel ServerNet Adapter

Installation and Support Guide available at the NonStop Technical Library website:

http://h30163.www3.hp.com/ntl/.

Configure the disk array devices in the same way you would configure any new disk on the host.

Creating scripts to configure all devices at once may save you considerable time.

Refer to Fibre Channel ServerNet Adapter Installation and Support Guide, at the NonStop Technical

Library website:

http://h30163.www3.hp.com/ntl/.

To configure the array disk devices, use SCF commands including ADD, START, and INIT as detailed

in subsection DISK configuration (ESS Connection) of Chapter 2, Installing an FCSA.

Installing and configuring NonStop for the XP disk array