HP StorageWorks XP12000 Manuel de configuration - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} HP StorageWorks XP12000. HP StorageWorks XP12000 42 pages. Cache lun xp
Également pour HP StorageWorks XP12000 : Note de mise à jour (13 pages), Manuel de l'administrateur (50 pages), Manuel de configuration (40 pages), Manuel de configuration (40 pages), Manuel de configuration (36 pages), Manuel de configuration (36 pages), Manuel de configuration (30 pages), Manuel de configuration (36 pages), Note de mise à jour (5 pages), Manuel de configuration du système (49 pages), Manuel de configuration du système (43 pages), Manuel de configuration du système (42 pages), Manuel de configuration du système (35 pages), Manuel de configuration (46 pages), Manuel de configuration (46 pages), Manuel de configuration (40 pages), Manuel de configuration (44 pages), Manuel de configuration (38 pages), Manuel de configuration (34 pages), Manuel de configuration (30 pages), Manuel de configuration (30 pages), Manuel de configuration (42 pages), Manuel de configuration (50 pages), Manuel de l'utilisateur (30 pages)

Imprimer la page
HP StorageWorks XP12000 Manuel de configuration
For detailed information, see

Failover

The disk arrays support many standard software products that provide host, application, or I/O path
failover and management. The Veritas Cluster Server, Sun Cluster, and Fujitsu Siemens Computers
PRIMECLUSTER host failover products are supported for the Sun Solaris operating system. Refer to the
documentation for these products and Sun technical support for installation and configuration
information. Your HP representative may have to set specific disk array System Modes for these
products. Check with your HP representative for the current versions supported.
For I/O path failover, different products are available from Sun, Veritas, and HP. Sun supplies software
called Sun StorEdge Traffic Manager (STMS) for Solaris 8/9 and Storage Multipathing for Solaris
10. Veritas offers Veritas Volume Manager (VxVM) which includes Dynamic MultiPathing (DMP). HP
supplies Hitachi Data Link Manager (HDLM). All these products provide multipath configuration
management, FCAs I/O load balancing, and automatic failover support, however their level of
configuration possibilities and FCAs support differs.
Refer to the manufacturers' manuals for instructions. STMS, Sun Storage Multipathing, and VxVM
installation manuals can be downloaded from the Sun website at
website at http://www.veritas.com.

SNMP configuration

The XP family of disk arrays and the SVS 200 support standard Simple Network Management Protocol
(SNMP) for remotely managing arrays. The SNMP agent on the service processor (SVP) performs
error-reporting operations requested by the SNMP manager. SNMP properties are usually set from
the SVP but they can also be set remotely using XP Remote Web Console or XP Command View
Advanced Edition Software. Refer to the applicable user's guide for procedures.
Figure 1 SNMP configuration
.

XP RAID Manager command devices

HP StorageWorks XP RAID Manager manages HP StorageWorks XP Business Copy Software or HP
StorageWorks XP Continuous Access Software operations from a host server. To use RAID Manager
you must designate at least one LDEV as a command device. This can be done with Remote Web
Console or XP Command View Advanced Edition Software. Refer to the applicable user guide for
information about how to designate a command device.
Creating scripts to configure all devices at once may save you considerable time.
"Disk array device
emulations" on page 31.
XP Disk Array Configuration Guide for Sun Solaris
http://www.sun.com
and the Veritas
9