HP StorageWorks XP12000 Manuel de configuration - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} HP StorageWorks XP12000. HP StorageWorks XP12000 30 pages. Cache lun xp
Également pour HP StorageWorks XP12000 : Note de mise à jour (13 pages), Manuel de l'administrateur (50 pages), Manuel de configuration (42 pages), Manuel de configuration (40 pages), Manuel de configuration (40 pages), Manuel de configuration (36 pages), Manuel de configuration (36 pages), Manuel de configuration (30 pages), Manuel de configuration (36 pages), Note de mise à jour (5 pages), Manuel de configuration du système (49 pages), Manuel de configuration du système (43 pages), Manuel de configuration du système (42 pages), Manuel de configuration du système (35 pages), Manuel de configuration (46 pages), Manuel de configuration (46 pages), Manuel de configuration (40 pages), Manuel de configuration (44 pages), Manuel de configuration (38 pages), Manuel de configuration (34 pages), Manuel de configuration (30 pages), Manuel de configuration (42 pages), Manuel de configuration (50 pages), Manuel de l'utilisateur (30 pages)

Imprimer la page
HP StorageWorks XP12000 Manuel de configuration

SNMP configuration

The XP family of disk arrays and the SVS 200 support standard SNMP for remotely managing arrays.
The SNMP agent on the SVP performs error-reporting operations requested by the SNMP manager.
SNMP properties are usually set from the SVP but they can also be set remotely using P9000 or XP
Command View Advanced Edition Software or XP Remote Web Console. For specific procedures,
see the applicable user guide.
Figure 1 SNMP configuration
.

RAID Manager command devices

HP StorageWorks P9000 RAID Manager Software manages HP StorageWorks XP Business Copy
Software or HP StorageWorks XP Continuous Access Software operations from a host server. To use
RAID Manager, you must designate at least one LDEV as a command device. This can be done with
P9000 or XP Command View Advanced Edition Software or Remote Web Console. For information
about how to designate a command device, see the applicable user guide.
Creating scripts to configure all devices at once may save you considerable time.

Installation roadmap

Perform these actions to install and configure the disk array:
1.
Installing and configuring the disk array
Defining the paths
Setting the host mode and host group mode for the disk array ports
Setting the system option modes
Configuring the Fibre Channel ports
2.
Installing and configuring the host
Loading the operating system and software
Installing and configuring the FCAs
Clustering and fabric zoning
Fabric zoning and LUN security for multiple operating systems
3.
Connecting the disk array
XP Disk Array Configuration Guide: VMware
9