HP XP20000/XP24000 Manuel de configuration - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} HP XP20000/XP24000. HP XP20000/XP24000 34 pages. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Également pour HP XP20000/XP24000 : Note de mise à jour (13 pages), Manuel d'intégration (29 pages), Note de mise à jour (4 pages), Manuel de l'administrateur (50 pages), Manuel de configuration (42 pages), Manuel de configuration (40 pages), Manuel de configuration (40 pages), Manuel de configuration (36 pages), Manuel de configuration (36 pages), Manuel de configuration (30 pages), Manuel de configuration (36 pages), Note de mise à jour (5 pages), Manuel de configuration (46 pages), Manuel de configuration (46 pages), Manuel de référence (46 pages), Manuel de configuration (40 pages), Manuel de configuration (44 pages), Manuel de configuration (38 pages), Manuel de configuration (30 pages), Manuel de configuration (30 pages)

CAUTION:

The correct host mode must be set for all new installations (newly connected ports) to Windows hosts.

Do not select a mode other than 2C or 0C. Changing a host mode after the host is connected is

disruptive and requires a server reboot.

When a new host group is added, additional host group modes (options) can be configured. The

storage administrator must verify if an additional host group mode is required for the host group.

The following host group modes (options) are available for Windows:

Table 3 Host group modes (options)

Host Group

Function

Mode

Parameter Setting Failure for TPRLO

When using the Emulex FCA in the Windows environment, the

parameter setting for TPRLO failed. After receiving TPRLO and

FCP_CMD, respectively. PRLO will respond when HostMode=0x0C/

0x2C and HostModeOption=0x06. (MAIN Ver.50-03-14-00/00

and later)

SIM report at link failure.

Select HMO 13 when you want SIM notification when the number

of link failures detected between ports exceeds the threshold.

V-Vol expansion.

Select HMO 40 when all of the following conditions are satisfied:

The host mode 0C Windows or 2C Windows Extension is used.

You want to automate recognition of the DP-VOL capacity after

increasing the DP-VOL capacity.

Installing and configuring Windows for the XP family of disk arrays

Default

Inactive