HP Xw460c - ProLiant - Blade Workstation Manuel d'instructions d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 8 pages. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Également pour HP Xw460c - ProLiant - Blade Workstation : Manuel de mise en œuvre (35 pages), Manuel de prévention des erreurs (12 pages), Livre blanc technique (12 pages), Mise à jour du micrologiciel (9 pages), Manuel d'installation (2 pages), Manuel des questions fréquemment posées (14 pages), Poster d'installation (9 pages), Manuel d'installation (33 pages), Manuel de gestion (28 pages), Manuel du matériel (23 pages), Vue d'ensemble (35 pages), Manuel de l'utilisateur (33 pages), Manuel d'optimisation (13 pages), Garantie limitée (10 pages), Manuel d'instructions d'installation (10 pages), Instructions d'installation (4 pages), Instructions d'installation (2 pages)

HP Xw460c - ProLiant - Blade Workstation Manuel d'instructions d'installation
For the above blade workstation, the driver version is 6.14.10.8662 — therefore, an updated Windows
XP driver is required.
The Windows XP graphics driver for the Quadro FX 1600M is available as a softpaq. To obtain the
softpaq, perform the following steps, either directly on the blade workstation or on another computer:
1.
Go to
http://www.hp.com/support/xw460c
2.
Click on Download drivers and software
3.
Select the operating system Microsoft Windows XP Professional
4.
Select Driver - Graphics - Nvidia
5.
Locate version 160.02 or later for the NVIDIA Quadro Professional Driver for Blade Workstations
softpaq — always use the most recent driver. Click Download for the softpaq.
6.
You'll be presented with an option to Run or Save the softpaq. Save the softpaq to a temporary
location. If you're not performing these steps on the blade workstation, transfer the saved softpaq
to the blade workstation using whatever method is most convenient, such as iLO 2 remote media.
RHEL4
Because RHEL4 is not factory-installed on the blade workstation, there are no Linux graphics drivers
installed on the blade workstation as-shipped. However, if you have already installed RHEL4 on the
blade workstation, a graphics driver is installed. In either case, HP recommends that you download the
latest Linux graphics driver as follows:
1.
Go to
http://www.hp.com/support/xw460c
2.
Click on Download drivers and software
3.
Select the operating system Red Hat Enterprise Linux (AMD64/EM64T)
4.
Select Driver - Graphics - Nvidia
5.
Locate the latest version of the NVIDIA Graphics Driver for x86_64 Linux Blade Workstations
softpaq. Click Obtain software to begin the download process.
6.
You'll be presented with an option to Save the softpaq. Save the softpaq to a temporary location.
If you're not performing these steps on the blade workstation, transfer the saved softpaq to the
blade workstation using whatever method is most convenient, such as iLO 2 remote media.
Step 2 — Prepare the blade workstation
Removal of the blade workstation from the rack and removal of the blade workstation access panel is
described in the document HP ProLiant BL460c Server Blade Maintenance and Service Guide, available
at http://www.hp.com/support/xw460c_manuals. Follow the instructions in the Maintenance and Service
Guide to:
1.
Power down the blade workstation
2.
Remove the blade workstation from the rack
3.
Remove the blade workstation access panel
ENWW
Step 2 — Prepare the blade workstation
5