Panasonic SQC0410 Manuel rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Panasonic SQC0410. Panasonic SQC0410 2 pages.
Imprimer la page
To record the subject with reduced blur
Set the mode dial to [S].
Set the shutter speed by rotating the rear dial or the front dial.
Approximate shutter speed for outdoor recording in fi ne weather conditions: 1/1000 seconds or faster.
The ISO sensitivity becomes higher. This may result in more visible noise on the screen.
Adding markers to select and save pictures ([4K Burst(S/S)] only)
You can add markers if you press [Fn1] during recording. You can skip to the positions where you added markers on the slide view screen or 4K
burst playback screen.
2 Selecting pictures from 4K burst fi le and saving
1
Press [
].
2
Press the cursor buttons
4K burst fi les are displayed with [
3
Press the cursor button
The slide view screen for selecting pictures will be displayed.
4
Drag the frames to select the frame you want to save as a picture.
You can display the previous or next 45 frames in slide view by touching [
Burst(S/S)] only).
When a fi le with long burst time is selected ([4K Burst]/[4K Burst(S/S)] only):
We recommend that you make a rough selection of scenes using the 4K burst playback screen fi rst, and then select the frame you want to save as a
picture using the slide view screen.
Press [Fn3] to display the 4K burst playback screen.
Press the cursor button
You can start continuous rewind by pressing
You can start fast rewind/forward during continuous playback by pressing
Press the cursor button
Press [Fn3] to display the slide view screen.
5
Press [MENU/SET] to save the picture.
You can also perform the same operation by touching [
The picture will be saved in JPEG format.
Saving a picture by selecting a focus point after recording ([Post Focus])
The camera can perform Burst recording in the same picture quality as 4K photo recording while automatically shifting the focus to different areas.
After the recording, you can select the desired area on the screen and save a picture in which the selected area is in focus. This function is suited for
recording still objects.
1 Recording with [Post Focus]
1
Press [
].
2
Press the cursor buttons
and then press [MENU/SET].
3
Decide on the composition, and press the
shutter button halfway.
4
Press the shutter button fully to start recording.
Cancelling [Post Focus]: In step
Superimposing brighter parts of frames and combining them into one picture
([Light Composition])
Select multiple frames from 4K burst fi les recorded in 4K Photo mode that you wish to combine. Parts of the image that are
brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture.
Refer to the "Basic Operating Instructions" for details.
/ to select a 4K burst fi le.
].
.
to start continuous playback.
. To pause the rewind operation, press again.
to pause at the scene you want to save as a picture.
].
/ to select [ON]
2
, select [OFF].
]/[
] ([4K Burst]/[4K
Fn3
/. To return to continuous playback, press .
2 Selecting the desired focus area and
saving a picture
1
Select an image with the [
on the playback screen, and press
the cursor buttons .
2
Select and touch a focus area.
3
Touch [
] to save the picture.
The picture will be saved in JPEG format.
Fn1
Fn3
Fn1
] icon
Fn1