Diamond Systems JMM-5000-APH Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Diamond Systems JMM-5000-APH. Diamond Systems JMM-5000-APH 18 pages. Advanced technology 218w dc/dc power supply pc/104-plus module
Également pour Diamond Systems JMM-5000-APH : Manuel de l'utilisateur (18 pages)

Imprimer la page

4.8

Remote On/Off

The power supply can be switched on and off remotely in two ways; through a discrete logic input or through a

programmable serial command.

For the discrete logic input, a 2-pin connector is used to provide an on/off control and ground. Driving the on/off

control to a logic 0, or shorting it to the power supply common, will shut off all supply outputs (except the auxiliary

+5V for the microcontroller and power controller circuit). The control input has a pull-up resistor to drive it to a

default on state. The remote on/off circuit is always operational when appropriate power is supplied through

either the main input or the backup / battery input connections.

Usage of the programmable serial command remote on/off can be found in the Janus-MM-5000 Software Users

Manual.

4.9

Advanced System Controller

The intelligent Jupiter-5000 models include a system controller that offers advanced configuration, control, and

monitoring features. The system controller is accessed via a USB port and is accompanied by benchtop

configuration software as well as an application library for in-application real-time control.

Individual supply on/off control for +12V, +5V, and +3.3V outputs

Individual supply output voltage / current monitoring

Output voltage sequencing and slew rate control

Output voltage adjustment

Input voltage monitoring

Fault handling based on programmable limits with interrupt notification, including supply shutdown in case of

overload or other programmed conditions

Hiccup mode for auto-restart when fault conditions are removed

Min / max voltage and temperature logging

Secondary input cutover voltage selection

Information on using the advanced systems controller can be found in the Janus-MM-5000 Software Users

Manual.

JMM-5000 User Manual Rev B.00

Arrow.com.

Downloaded from

www.diamondsystems.com

Page 10