Panasonic PT-CW331R Spécifications - Page 10

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Panasonic PT-CW331R. Panasonic PT-CW331R 13 pages. Ultra-short throw 1-chip dlp projectors pt-cw3330 series
Également pour Panasonic PT-CW331R : Spécifications (6 pages)

Imprimer la page

1. Standard Setting-Up Position

Ultra Short-Throw DLP

Basic format

Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent

in this order. Add parameters according to the details of control.

STX

C2 C3

Start

(1 byte)

Command

(3 bytes)

(Control and/or query commands)

* STX and ETX are character chords. STX is 02 and ETX is 03 when expressed in hexadecimal.

CAUTION

• It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this

occurs, wait for 60 seconds, then try sending or receiving again.

• When sending multiple commands, be sure to wait for at least 0.5 second after receiving a response from the projector before

sending the next command.

• Additional time is sometimes required for response due to processing inside the projector. Set the time-out period for com-

mand response to 10 seconds or more.

Cable specifications

Control commands

Command : Parameter

PON

POF

IIS:HD1

IIS:RG1

IIS:RG2

IIS:VID

IIS:SVD

OSH:0

OSH:1

* Do

not send PON, POF or OSH commands continuously in a short period of time. Doing so may burst the lamp or shorten the lamp replacement

cycle.

* When a command that cannot be executed during standby mode is sent, the projector will send an ER401 command in reply.

As of June 2013

SFD13M001-1

™

Projector

P1 P2 ... Pn

ETX

Colon

End

(1 byte)

Parameters

(undefined length)

Projector

Function

POWER (STANDBY)

INPUT SELECT

AV MUTE

PC (DTE)

Standby power on

Standby power off

HDMI

RGB 1

RGB 2

Video

S-Video

AV mute off

AV mute on

PT-CW331R

Callback

PON

POF