Panasonic PT-DS20K Brochure & Specs - Page 5
Parcourez en ligne ou téléchargez le pdf Brochure & Specs pour {nom_de_la_catégorie} Panasonic PT-DS20K. Panasonic PT-DS20K 6 pages. 3-chip dlp projectors
Également pour Panasonic PT-DS20K : Spécifications (18 pages), Dessin dimensionnel (1 pages), Brochure (8 pages), Spécifications (18 pages)
Imprimer la page
Specifications
Model
Power supply
Power consumption
Dissipation BTU
DLP™ chip
Panel size
Display method
Pixels
Lens
Lamp
Screen size (diagonal)
3
Brightness*
3
Center-to-corner uniformity*
3
Contrast*
Resolution
Scanning frequency
SDI
SD-SDI
HD-SDI
Dual-link HD-SDI
3G-SDI
HDMI/DVI-D
RGB
YP
P
(YC
C
)
B
R
B
R
Video/YC
5
Optical axis shift*
Vertical
Horizontal
Keystone correction range
Keystone correction range
with optional Upgrade Kit
Installation
Terminals
SDI 1 IN
SDI 2 IN
3D SYNC IN/OUT
3D SYNC OUT
DVI-D IN
HDMI IN
RGB 1 IN
RGB 2 IN
VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
Cabinet materials
Dimensions (W × H × D)
10
Weight *
Shipping dimensions (W × H × D)
Shipping weight
3
Operation noise*
Operating environment
Applicable software
Supplied accessories
* 1
When the
is set to
S TA N D B Y M O D E
E C O
will not operate. Also, only certain commands can be received for external control
using the serial terminal.
* 2
The usage environment affects the lamp replacement cycle.
* 3
Measurement, measuring conditions, and method of notation all comply with ISO
21118 international standards.
* 4
WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB
(Coordinated Video Timing-Reduced Blanking).
* 5
Optical axis shift cannot be operated with the ET-D75LE50.
* 6
±22° with the ET-D75LE50, ±28° with the ET-D75LE6, and ±40° with the
ET-D75LE10 and ET-D75LE20.
* 7
Up to ±15° with the ET-D75LE50 and ET-D75LE6.
* 8
Up to a total of ±55° during simultaneous horizontal and vertical correction.
* 9
With legs at shortest position.
* 10 Average value. May differ depending on the actual unit.
* 11 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan
control is set to
e (for altitudes from 1,400 m to 2,700 m (4,593 ft
H I G H A LT I T U D E M O D
to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke
Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the
projector cannot be used in places at high altitude.
Dimensions
620
(24-7/16)
PT-DZ21K
200 –240 V AC, 50 / 60 Hz ( Max current requirements: 12 A @ 200 V )
2,300 W ( 0.3 W with
set to
STANDBY MODE
Max. 7,848 BT U /hour ( without light output: 7,585 BT U /hour)
24.4 mm ( 0.96 in ) diagonal (16 :10 aspect ratio )
DLP™ chip × 3, DLP™ projection system
2,304,000 (1,920 × 1,200 ) × 3,
total of 6,912,000 pixels
Optional powered zoom and fixed-focus lenses
465 W UHM lamp × 4, replacement cycle of up to 2,000 hours*
1.78 –15.24 m ( 70 – 600 in ),
1.78 – 7.62 m ( 70 –300 in ) with the E T-D75LE50,
16 :10 aspect ratio
20,000 lm (four-lamp )
90 %
10,000 :1 (full on /off, with dynamic iris set to "3" )
1,920 × 1,200 pixels
SMPTE ST 259 compliant, [ YC
C
4:2:2 10-bit] 480i, 576i
B
R
SMPTE ST 292 compliant, [ YC
C
4:2:2 10-bit] 720 / 50p, 720 / 60p, 1035 / 60i, 1080 / 50i,
B
R
1080 / 60i, 1080 /25p, 1080 /24p, 1080 /24sF, 1080 / 30p
SMPTE ST 372 compliant, [ RGB 4:4:4 12-bit /10-bit] 1080 / 50i, 1080 / 60i, 1080 /25p, 1080 /24p,
1080 /24sF, 1080 / 30p, [ X´ Y´ Z´ 4:4:4 12-bit] 2,048 × 1,080 /24p, 2,048 × 1,080 /24sF
SMPTE ST 424 compliant, [ YP
P
4:2:2 10-bit] 1080 / 50p, 1080 / 60p, [ RGB 4:4:4 12-bit /10-bit]
B
R
1080 / 50i, 1080 / 60i, 1080 /25p, 1080 /24p, 1080 /24sF, 1080 / 30p
480p, 576p, 720 / 60p, 720 / 50p, 1080 / 60i, 1080 / 50i, 1080 /24p, 1080 /24sF, 1080 /25p, 1080 / 30p, 1080 / 60p, 1080 / 50p
4
VG A ( 640 × 480 ) –WUXG A*
(1,920 × 1,200 ), compatible with non-interlaced signals only, dot clock: 25 –162 MHz
f
: 15 –100 kHz, f V: 24 –120 Hz, dot clock: 20 –162 MHz
H
f
: 15.75 kHz, f
: 60 Hz [480i (525i)]
H
V
f
: 31.50 kHz, f
: 60 Hz [480p (525p)]
H
V
f
: 15.63 kHz, f
: 50 Hz [576i (625i)]
H
V
f
: 31.25 kHz, f
: 50 Hz [576p (625p)]
H
V
f
: 45.00 kHz, f
: 60 Hz [720 (750)/60p]
H
V
f
: 15.75 kHz, f
: 60 Hz [ NTSC / NTSC4.43 / PAL-M / PAL60 ] , f
H
V
± 55 % (±44 % with the E T-D75LE6 )
from center of screen ( powered )
±20 % (±15 % with the E T-D75LE6 )
from center of screen ( powered )
6
Vertical: ±40° *
, horizontal: ±15°
6
8
7
Vertical: ±45° *
*
, horizontal: ±40° *
Ceiling /floor, front /rear
BNC × 1 ( 3G/HD/SD-SDI)
BNC × 1 ( HD/SD-SDI)
BNC × 1 ( 3D timing signal )
BNC × 1 ( 3D timing signal )
DVI-D 24-pin × 1 ( DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI 19-pin × 1 ( Deep Color, compatible with HDCP)
BNC × 5 ( RGB / YP
P
/ YC
C
/ YC × 1)
B
R
B
R
D-Sub HD 15-pin (female ) × 1 ( RGB / YP
BNC × 1 ( composite video )
D-sub 9-pin (female ) × 1 for external control ( RS-232C compliant)
D-sub 9-pin ( male ) × 1 for link control
M3 × 1 for wired remote control
M3 × 1 for link control (for wired remote control )
D-sub 9-pin (female ) × 1 for external control ( parallel )
RJ-45 × 1 (for network connection, 10Base-T/100Base-T X, compliant with PJLink™ )
Molded plastic
9
620 × 291*
× 800 mm ( 24-7/16 × 11-15/ 32*
Approximately 43 kg ( 94.8 lbs ) ( optional lens not included )
U / EJ models: 965 × 418 × 865 mm ( 38 × 16-15 / 32 × 34-1/16 in ), E models: 946 × 402 × 846 mm ( 38 × 15-13 /16 × 33-5 /16 in ).
U models: 53 kg (116.8 lbs ), EJ models: 54 kg (119.0 lbs ), E models: 51 kg (112.4 lbs )
49 dB ( quad lamp operation )
Operating temperature: 0 – 45 °C ( 32 –113 °F )*
Logo Transfer Software, Multi Projector Monitoring & Control Software,
Geometry Manager Pro ( included in the E T-UK 20 )
Power cord with secure lock, wireless /wired remote control unit, batteries ( R6 /A A type × 2 )
, network functions such as power on over the LAN
u n i t: mm ( i n c h es)
800
(31-1/2)
PT-DS20K
1
,*
9 W with
set to
ECO
STANDBY MODE
NORMAL
24.1 mm ( 0.95 in ) diagonal (4:3 aspect ratio )
DLP™ chip × 3, DLP™ projection system
1,470,000 (1,400 × 1,050 ) × 3,
total of 4,410,000 pixels
2
1.78 –15.24 m ( 70 – 600 in ),
1.78 – 7.62 m ( 70 –300 in ) with the E T-D75LE50,
4:3 aspect ratio
1,400 × 1,050 pixels
( Input signals that exceed this resolution will
be converted to 1,400 × 1,050 pixels.)
f
: 37.50 kHz, f
: 50 Hz [720 (750)/50p]
H
V
f
: 33.75 kHz, f
: 60 Hz [1035/60i]
H
V
f
: 33.75 kHz, f
: 60 Hz [1080 (1125)/60i]
H
V
f
: 28.13 kHz, f
: 50 Hz [1080 (1125)/50i]
H
V
f
: 28.13 kHz, f
: 25 Hz [1080/25p]
H
V
: 15.63 kHz, f
: 50 Hz [ PAL / PAL-N / SECAM ]
H
V
± 50 % (±40 % with the E T-D75LE6 )
from center of screen ( powered )
±30 % (±20 % with the E T-D75LE6 )
from center of screen ( powered )
8
*
P
/ YC
C
× 1)
B
R
B
R
9
× 31-1/2 in ) ( optional lens not included )
11
, operating humidity: 20 – 80 % ( no condensation )
N O T E S O N U S E
1. Do not install the projector in locations that are subject to excessive water, humidity, steam,
or oily smoke. Doing so may result in fire, malfunction, or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This
lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
3. The projector uses of high-wattage lamp that becomes very hot during operation. Please
observe the following precautions:
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 inches ) or more around
the projector's exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple
( stacked ) projection. When stacking projector units, be sure to provide the amount of
space indicated between them. These space requirements also apply to installation where
only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, temperature of the air surrounding the
projector must be between 0 °C ( 32 °F ) and 35 °C ( 95 °F ). Also make sure the projec-
tor's intake and exhaust openings are not blocked. Take particular care to ensure that hot
air from the exhaust openings is not sucked into the intake.
4. If the projector is to be operated continuously 24 hours a day / 7 days a week, use the mul-
ti-lamp optical system's alternating lamp operation ( lamp changer) function. The projector
can be operated continuously 24 hours a day / 7 days a week in four-lamp operation mode,
but it will automatically operate with three lamps for 8 hours of the 24 hours / 7 days.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly
for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly
depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
6. Because the E T-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used
with it.
7. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an
indication of faulty lamp performance.
PT-DW17K
.)
21.6 mm ( 0.85 in ) diagonal (16 : 9 aspect ratio )
DLP™ chip × 3, DLP™ projection system
1,049,088 (1,366 × 768 ) × 3,
total of 3,147,264 pixels
1.78 –15.24 m ( 70 – 600 in ),
1.78 – 7.62 m ( 70 –300 in ) with the E T-D75LE50,
16 : 9 aspect ratio
17,000 lm (four-lamp )
1,366 × 768 pixels
( Input signals that exceed this resolution will
be converted to 1,366 × 768 pixels.)
–
f
: 27.00 kHz, f
H
V
f
: 27.00 kHz, f
H
V
f
: 33.75 kHz, f
H
V
f
: 67.50 kHz, f
H
V
f
: 56.25 kHz, f
H
V
±70 % (± 60 % with the E T-D75LE6 )
from center of screen ( powered )
±30 % (±20 % with the E T-D75LE6 )
from center of screen ( powered )
6
Vertical: ±40° *
–
–
Logo Transfer Software, Multi Projector
Monitoring & Control Software
: 24 Hz [1080/24p]
: 48 Hz [1080/24sF]
: 30 Hz [1080/30p]
: 60 Hz [1080/60p]
: 50 Hz [1080/50p]