Panasonic PT-DZ12000U - WUXGA DLP Projector Brochure & Specs - Page 3
Parcourez en ligne ou téléchargez le pdf Brochure & Specs pour {nom_de_la_catégorie} Panasonic PT-DZ12000U - WUXGA DLP Projector. Panasonic PT-DZ12000U - WUXGA DLP Projector 6 pages. 3-chip dlp projector
Également pour Panasonic PT-DZ12000U - WUXGA DLP Projector : Manuel de configuration et d'utilisation (37 pages)
Imprimer la page
Panasonic Technologies Assure Spectacular Image Performance
Incredible Brightness & High Picture Quality
New AC Lamp and Multi-Lamp System
Panasonic's innovative 4-lamp
optical system uses newly
developed 300-watt AC lamps to
deliver remarkable 12,000-lumen
brightness. The 4-lamp system
means superb reliability too – the
projector keeps working even if
one lamp goes out. A full 24
hours of continuous operation is
possible in Lamp Relay mode.
* The values above are maximum values when
all 4 lamps are replaced simultaneously,
and when they are used in cycles of being
turned on for 3.5 hours and off for 0.5 hour.
When the lamps are turned on and off
more frequently, the lamp replacement
cycle is shortened. (It is recommended
that the mechanical shutter be used to
turn images off for a short period.)
Detail Clarity Processor
Exclusive to Panasonic, this new image-processing circuit analyzes
the video signal frequency range for each scene by extracting data on
the distribution of high, mid, and low-frequency components, and
brings out fine details accordingly. The resulting images have a more
natural, three dimensional appearance with crisp, clear detail.
OFF
Conventional sharpness control:
Sharpness is applied uniformly, which can
cause a halo or ring effect.
Dynamic Iris
Panasonic's Dynamic Iris uses a scene-linking aperture mechanism
to achieve a remarkable 5,000:1 contrast without lowering the
12,000-lumen brightness. It helps reproduce deeper, richer blacks
and gives images more detailed textures.
OFF
Full 10-Bit Processing
Use of a full 10-bit picture processing system helps achieve smooth
tonal expression. Complexions and other flesh tones look natural and
true-to-life, with accurate gradation.
Lamp replacement cycle and brightness
guidelines
Light output
Lamp replacement
Lamp mode
(lumens)
cycle (hours)
Four lamps
12,000
2,000
Three lamps
9,000
2,600
Two lamps
6,000
4,000
One lamp
3,000
8,000
ON
Detail Clarity Processor: Signal frequency
is extracted realtime and necessary
sharpness is applied at varying degrees for
natural, life-like images.
* Images are simulated.
ON
* Images are simulated.
High-Resolution WUXGA Images
In response to the increasing popularity of wide-screen image
viewing, the PT-DZ12000U features native WUXGA resolution to
cover full-HD specifications. This brings you lifelike projection of
intricate, highly detailed images.
WUXGA: 1,920 x 1,200 pixels
SXGA +
�
1,400 x 1,050 pixels
�
XGA
1,024 x 768 pixels
System Daylight View
Screen visibility is lower when a projector is used during daylight
hours or in a room with lights on. Panasonic's System Daylight View
circuit compensates for these brighter environments, so that images
are crisp, clear and easy to see no matter what the conditions are.
OFF
3D Color Management System
Some people like to view large-screen images from relatively close up to
get the maximum viewing impact. But at close range, the colors perceived
by the human eye tend to differ slightly from the original colors. The 3D
Color Management System solves this problem by enabling fine
adjustment of colors so they appear faithful to the originals when projected
onto a large screen.
Original
image
Without
compensation
Dual Link HD-SDI Signal Support (Optional)
Just add an ET-MD100SD4 expansion board and the projector supports
Dual Link HD-SDI signals. HD-SDI signals use two cables to achieve
twice the color resolution of the conventional single link system.
�
Full HD
1,920 x 1,080 pixels
�
UXGA
1,600 x 1,200 pixels
ON
* Images are simulated.
With
compensation
* Images are simulated.
ET-MD100SD4
2