Panasonic PT-FX400E Spécifications - Page 6

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Panasonic PT-FX400E. Panasonic PT-FX400E 6 pages. Pt-fw430 series lcd projector
Également pour Panasonic PT-FX400E : Manuel d'utilisation (46 pages)

Imprimer la page

Specifications

Model

PT-FW430EA

Power supply

100 – 240 V AC, 3.9 –1.4 A, 50/60 Hz

Power consumption

330 W (0.4 W at 220 –240 V AC, 0.3 W at 100 –120 V AC when standby mode set to eco*

9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out.)

18.9 mm (0.74 inches) diagonal ( 16:10 aspect ratio )

LCD panel

Panel size

Display method

Transparent LCD panel (× 3, R/G/B)

Pixels

1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels

Pixel configuration

Stripe

Lens

Manual 2× zoom (throw ratio: 1.34 – 2.68:1),

manual focus F 1.7 – 2.6, f 21.6 – 43.0 mm

Lamp

250 W UHM lamp (The lamp replacement cycle is 6,000 hours. *

Screen size (diagonal)

0.84 –7.62 m (33 – 300 inches), 16:10 aspect ratio

Brightness*

3,500 lm (lamp mode: normal)

Centre-to-corner uniformity*

80%

Contrast*

600:1 (full on/full off)

Resolution

1,280 × 800 pixels (Input signals that exceed this

resolution will be converted to 1,280 × 800 pixels.)

Scanning

HDMI/DVI-I (digital)

: 27.0 kHz – 68.7 kHz; f

frequency

DVI-I (analogue)/RGB

: 15 .6 kHz – 91.1 kHz; f

(YC

)

: 15.75 kHz; f

: 31.50 kHz; f

: 15.63 kHz; f

: 31.25 kHz; f

: 37.50 kHz; f

: 45.00 kHz; f

Video/S-Video

: 15.75 kHz; f

Optical axis shift

Vertical

±51% from centre of screen (manual)

Horizontal

±24% from centre of screen (manual)

Keystone correction range

Vertical: ±30°

Installation

Ceiling/desk, front/rear

Built-in speaker

Output power: 5.0 W (monaural)

Terminals

HDMI IN

HDMI 19-pin × 1 (Deep Colour, compatible with HDCP)

DVI-I IN

DVI-I 29-pin × 1

Digital: (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)

Analogue: (RGB/YP

COMPUTER (RGB) IN

D-sub HD 15-pin (female) × 1 (RGB/YP

VIDEO IN

RCA pin × 1 (composite video)

S-VIDEO IN

Mini DIN 4-pin × 1 (S-Video)

AUDIO IN 1

M3 × 1 (L, R × 1), 0.5 Vrms

AUDIO IN 2

M3 × 1 (L, R × 1), 0.5 Vrms

AUDIO IN 3

RCA pin × 2 (L, R × 1), 0.5 Vrms

AUDIO OUT

M3 × 1 (L, R × 1) (monitor out: 0 – 2.0 Vrms, variable)

SERIAL IN

D-sub 9-pin (female) × 1 for external control (RS-232C compliant)

LAN

RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)

WIRELESS MODULE

Connector for optional wireless module ET-WM200E × 1

Cabinet materials

Moulded plastic (PC+ABS)

Dimensions (W × H × D)

430 × 125.5*

Weight

Approximately 6.0 kg (13.2 lbs.)

Operating environment

Operating temperature: 0°C – 40°C (32°F– 104°F)*

Supplied accessories

Power cord, wireless remote control unit, batteries (R6 type × 2), software CD-ROM (Logo Transfer

Software, Multi Projector Monitoring & Control Software Ver. 2.5, Wireless Manager ME 5.5)

* 1 When the standby mode is set to eco, network functions such as power on over the

LAN will not operate. Also, only certain commands can be received for external control

using the serial terminal.

* 2 This value is calculated by continuously turning the lamp on for 2 hours and off for

0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off

more frequently, or if it is left on for longer intervals.

N O T E S O N U S E

1. Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.

2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or

extended use.

3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions:

• Never place objects on top of the projector while it is in operation.

• Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector's intake and exhaust openings.

• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.

When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one

projector unit is operating at one time and the other unit is used as a backup.

• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be between 0°C (32°F) and 40°C (104°F). Also, make sure

the projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.

4. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.

• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.

• The brightness of the lamp will gradually decrease with use.

5. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability

differs depending on region and country. This product may be subject to export control regulations. The projection distances and throw ratios

given in this brochure are for use only as guidelines. For more detailed information, please consult the dealer from whom you are purchasing

the product. Also, the throw ratios shown are the values for an 80-inch image size (measured diagonally). The throw ratio varies depending

on the diagonal image size. The PJLink trademark is an application trademark in Japan, the United States, and other countries and regions

or registered trademarks. All other trademarks are the property of their respective trademark owners. Projection images simulated.

: 24 .0 Hz – 85.0 Hz; dot clock: 25 .2 MHz– 148.5 MHz

: 24 .0 Hz – 85.1 Hz; dot clock: 162 MHz or lower

: 60 Hz (480i [525i])

: 60 Hz (480p [525p])

: 50 Hz (576i [625i])

: 50 Hz (576p [625p])

: 50 Hz (720 [750]/50p)

: 60 Hz (720 [750]/60p)

: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), f

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,

VGA (640 × 480) – WSXGA + (1,680 × 1,050), compatible with non-interlaced signals only;

dot clock: 25.2 –146.25 MHz;

Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,

VGA (640 × 480) – WSXGA + (1,680 × 1,050), compatible with non-interlaced signals only;

dot clock: 25.2 –146.25 MHz;

(YC

))

× 1)

× 323 mm (16-15/16˝ × 4-15/16˝ *

* 3 Measurement, measuring conditions and method of notation all comply with ISO

21118 international standards.

* 4 With legs at shortest position.

* 5 The operating temperature range is 0°C to 35°C (32°F to 95°F) when used in High-

Altitude mode (1,400 m to 2,700 m (4,593 ft to 8,858 ft)).

PT-FX400EA

20.3 mm (0.8 inches) diagonal ( 4:3 aspect ratio )

Transparent LCD panel (× 3, R/G/B)

786,432 (1,024 × 768) × 3, total of 2,359,296 pixels

Stripe

Manual 2× zoom (throw ratio: 1.48 –2.96:1),

manual focus F 1.7– 2.6, f 24.0 – 47.2 mm

)

0.84 –7.62 m (33 – 300 inches), 4:3 aspect ratio

4,000 lm (lamp mode: normal)

1,024 × 768 pixels (Input signals that exceed this

resolution will be converted to 1,024 × 768 pixels.)

: 33.75 kHz; f

: 60 Hz (1080 [1125]/60i)

: 28.13 kHz; f

: 50 Hz (1080 [1125]/50i)

: 27.00 kHz; f

: 24 Hz (1080 [1125]/24p)

: 33.75 kHz; f

: 30 Hz (1080 [1125]/30p)

: 67.50 kHz; f

: 60 Hz (1080 [1125]/60p)

: 56.25 kHz, f

: 50 Hz (1080 [1125]/50p)

: 15.63 kHz; f

: 50 Hz (PAL/PAL-N/SECAM)

±50% from centre of screen (manual)

±27% from centre of screen (manual)

× 12-23/32˝ ) (Protruding parts not included)

; operating humidity: 20%–80% (no condensation)

Dimensions

4 3 0 (16 -15 / 16 )

Projection Distance

PT-FW430EA (16:10 aspect ratio; throw ratio: 1.34–2.68:1)

Projection size

Projection distance

(diagonal)

Min

Max

(wide)

(telephoto)

0.84 m

–

1.8

33˝

(–)

(6.0)

1.02 m

1.1

2.3

40˝

(3.6)

(7.4)

2.03 m

2.3

4.6

80˝

(7.4)

(14.9)

3.05 m

3.4

6.9

120˝

(11.2)

(22.5)

5.08 m

5.7

11.5

200˝

(18.8)

(37.6)

7.62 m

8.6

17.2

(28.3)

(56.5)

300˝

PT-FX400EA (4:3 aspect ratio; throw ratio: 1.48–2.96:1)

Projection size

Projection distance

(diagonal)

Min

Max

PT-FW430 - E (16:10)

(wide)

(telephoto)

0.84 m

–

1.9

33˝

(–)

(6.4)

1.02 m

1.2

2.4

40˝

(3.8)

(7.8)

2.03 m

2.4

4.8

80˝

(7.8)

(15.7)

3.05 m

3.6

7.2

120˝

(11.9)

(23.6)

5.08 m

6.1

12.0

200˝

(19.9)

(39.5)

7.62 m

9.1

18.1

300˝

(29.9)

(59.3)

Optional Accessories

PT-FX400 - E (4:3)

ET-PKF110H

Ceiling mount

bracket for

high ceilings

ET-WM200E

ET-EMF100

Wireless module

Replacement

filter unit

Freeware

Multi Projector

Monitoring and

Control Software

Ver. 2.5

For more information about Panasonic projectors

http://panasonic.net/avc/projector

JQA-QMA14392

EC98J2010

Factories of Business Solutions Business Group have received ISO

14001:2004—the Environmental Management System certification

(except for third parties' peripherals).

All information included here is valid as of July 2011.

PT-FW430EA2 Printed in Japan.

unit: millimetres (inches)

3 2 3 ( 12-2 3 / 3 2 )

unit: metres (feet)

Height from edge

of screen to centre

of lens

–

0.45

–

1.5)

–

0.54

–

1.8)

-0.01

–

1.09

–

3.6)

-0.02

–

1.63

(-0.1

–

5.3)

–

2.73

-0.03

(-0.1

–

8.9)

-0.05

–

4.09

(-0.2

–

13.4)

Height from edge

of screen to centre

of lens

–

0.50

–

1.7)

–

0.61

–

2.0)

–

1.22

–

4.0)

–

1.83

–

6.0)

–

3.05

–

10.0)

–

4.57

–

15.0)

ET-PKF110S

Ceiling mount bracket

for low ceilings

ET-LAF100A

Replacement

lamp unit

051