Panasonic PTAE500U - LCD PROJECTOR Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic PTAE500U - LCD PROJECTOR. Panasonic PTAE500U - LCD PROJECTOR 30 pages. Home cinema projector
Également pour Panasonic PTAE500U - LCD PROJECTOR : Manuel d'utilisation (30 pages), Spécifications (4 pages), Manuel d'utilisation (30 pages)
Imprimer la page
Projector control panel
®
®
®
MENU
EN_:R
o%o
Remote control unit
LCDPROJECI_OR
®
®
_TEMP
indicator (page 44)
This indicator illuminates if an abnormally high temperature is detected
inside the projector. If the temperature rises above a certain level, the
power supply will be turned off automatically
and the indicator will flash.
(_ LAMP indicator
(page 45)
This indicator illuminates when it is time to replace the lamp unit. It flashes
if a circuit abnormality is detected.
(_ Power indicator
(pages 22, 24 and 25)
This indicator illuminates red when the main power is switched on (standby
mode), and it illuminates green when projection of an image begins.
(_ POWER button (pages 22 and 24)
(_MENU
button (page 32)
This button is used to display the "MAIN MENU". When a menu screen is
being displayed, it can be used to return to a previous screen or to clear the
screen.
®Arrow
(&, V, • and II_) buttons
(page 34)
These buttons are used to select and adjust items in the on-screen menus.
(_ ENTER button (page 34)
This button is used to accept and to activate items selected in the
on-screen menus.
(_INPUT select button (page 23)
These buttons are used to switch the input signals from the connected
equipment.
(_ KEYSTONE button (page 26)
This button is used to correct keystone distortion of the projected image
when the projector position is tilted upward or downward.
(_NORMAL
button (page 35)
This button is used to reset the projector adjustment values to the factory
default settings.
@ASPECT
button (page 28)
This button is used for aspect adjustment (vertical and horizontal
proportions).
@ LIGHT button (page 30)
This button is used to illuminate the buttons on the remote control unit.
@ FREEZE button (page 30)
This button is used to momentarily freeze projection so that a still picture is
displayed.
1(_PICTURE MODE button (page 27)
This button is used to display the "PICTURE MODE" menu.
(_ USER MEMORY button (page 31)
This button is used to display the "MEMORY LOAD" menu.
14-ENGLISH
ENGLISH-15