Panasonic PTL292U - LCD PROJECTOR Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic PTL292U - LCD PROJECTOR. Panasonic PTL292U - LCD PROJECTOR 36 pages. Panasonic pt-l292u: user guide
Également pour Panasonic PTL292U - LCD PROJECTOR : Manuel d'utilisation (36 pages)

Imprimer la page

Initial Set Up of the LCD Projector

Place the LCD Projector on a stable, flat surface according to the LCD Projector/ Screen Relative Position Chart on page 9.

- Remove the lens cap.

1 Insert Power Cord into LCD Projector

AC socket and connect to properly

grounded wall outlet.

Set the Main Power Switch to ON.

- The STAND BY(R) ON(G) indicator lights red.

(It takes about 45 seconds for image to appear clearly.)

Press POWER on the LCD Projector or remote control ON.

- The STAND BY(R) ON(G) indicator changes to green.

Use the FOCUS and ZOOM Rings

to adjust the focus and size of the image.

Use the Height/ Level Adjusters

to adjust the vertical angle of the projector as specified on page 9. (See illustration below.)

Use the FOCUS and ZOOM Rings

to readjust the focus and size of the image.

Où R SC bo

FOCUS RING

To Raise:

turn adjusters

in direction of

arrows.

Adjusters

Center the projected image on the screen.

Center

To Lower:

turn adjusters

in direction of

arrows.

Projected

image

Screen

Notes:

* When adjustments are made improperly, the picture may become distorted, depending on the relative positions of

the LCD Projector and the screen.

* To prevent the LCD Projector from wobbling, adjust both adjusters so that they firmly contact the mounting surface.

Moving the LCD Projector

First, turn Main Power Switch OFF and

disconnect Power Cord. Second, disconnect

all other cables.

Press in on handle to release or store handle.

- Make sure the lens cap is in place to

prevent damage to the lens.

Press in on handle.