Panasonic PTLC50U - LCD PROJECTOR Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic PTLC50U - LCD PROJECTOR. Panasonic PTLC50U - LCD PROJECTOR 17 pages. Panasonic pt-lc50u: user guide
Également pour Panasonic PTLC50U - LCD PROJECTOR : Manuel d'utilisation (17 pages)

Imprimer la page
STATUS Code
This LCD Projector has a STATUS Code display which calls your attention to
problem conditions existing inside the LCD Projector. The LCD Projector displays
a Status Code Indication each time an internal problem is detected.
If any of the following indications appear in the STATUS Code display, immedi-
ately turn off the Power button, and then see the chart to determine a course of
action.
eas
Symptom
Problem
Possible Solution
i
;
:
;
¢ Take the projector to your nearest
C-0
e Misinstalled Air Filter
e Properly install Air Filter Unit or
Unit or Lamp cover.
Lamp cover.
Ax
¢ Temperature
¢ Take the projector to your nearest
Service Center.
L-n
P-2
P-4
L-1
L-0
C-d
e Clogged air filter.
e Blocked air intake.
location.
¢ Place projector so that surround-
ing temperature is between 0 °C
(32 °F) and 40 °C (104 °F) and
the humidity is between 20 % and
80 % (with no condensation).
* The surrounding
temperature of the
place of use may be too
high.
Lamp does not light
up.
« If the Lamp will not light
after turning on the
main power 2 or3
times, the Lamp may be
damaged.
e Take the projector to your nearest
Service Center.
« Lamp Voltage is not
correct.
* Abnormal temperature
rise.
Sensor malfunction.
* Clean the filter.
+ Relocate projector to a proper
+ Other causes.
Lamp operation time is | ¢ It is nearly time to replace
over 1 900 hours.
the Lamp Unit.
Lamp operation time
|° The Lamp Unit must be
reaches 2 000 hours.
replaced.
Forced cooling fan
operating to expedite
lamp replacement.
* Replace the Lamp unit.
12