Panasonic RQTV0080-1P Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic RQTV0080-1P. Panasonic RQTV0080-1P 24 pages. Panasonic cd stereo system operating instructions model no. sc-pm23 rqtv0080-1p

Imprimer la page
Timer (continued)
Using the play or record timer
Using the play or record timer
You can set the timer to come on at a certain time to wake
you up (play timer) or to record from the radio or music port
source (record timer).
Preparation
Turn the unit on and set the clock (refer to page 11).
Timer
Play timer
Record timer
1
Press [CLOCK/TIMER] repeatedly to select your
desired timer.
CLOCK
2
Within 5 seconds, press [ /REW/4] or [ /FF/¢]
to set the starting time.
Play timer indicator
Record timer indicator
3
Press [CLOCK/TIMER] to confirm.
4
Repeat steps 2 and 3 to set the finishing time.
To activate the timer
Press [˚PLAY/REC] to turn on your desired timer.
5
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
12
Action
Prepare the music source you want to
listen to; cassette, disc, radio or music port
source, and set the volume.
Check the cassette's erasure prevention
tabs (refer to page 9), insert the cassette
and tune to the radio station (refer to page
10) or select the music port source (refer
to page 13).
˚ PLAY
˚ REC
Original display
Start time
Finish time
˚ PLAY
˚ REC
no display (off)
Other basic operations
Other basic operations
To
Action
change the settings
Repeat steps 1 to 4 and 6.
change the source
1) Press [
or volume
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings
Press [CLOCK/TIMER] repeatedly to
˚
(when the unit is on
select
or in standby mode)
˚
cancel
Press [
indicators from the display.
Note
• The play timer and record timer cannot be used together.
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The record timer will start 30 seconds before the set time, with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes on,
the system turns on and engages MUSIC PORT as the source. If
you wish to playback or record from the portable audio equipment,
activate the equipment's play mode and increase the volume. (See
the portable audio equipment's instruction manual.)
˚
PLAY/REC] to clear the timer
˚
PLAY or
REC.
PLAY/REC] to clear the timer