Panasonic RX-D45 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic RX-D45. Panasonic RX-D45 8 pages. Portable stereo cd system
Également pour Panasonic RX-D45 : Manuel d'utilisation (8 pages), Manuel d'utilisation (20 pages)

Panasonic RX-D45 Manuel d'utilisation

Discs

Basic play
Basic play
1
Press [x, CD OPEN/CLOSE] to open the disc tray and
then load the disc with the label facing up.
2
Press [x, CD OPEN/CLOSE] again to close.
3
Press [4/9, CD] to start play.
Stop
Press [8] (stop) during play.
playback
Pause play Press [4/9, CD] during play.
Press again to resume play.
Skip tracks Press [–/2] or [6/+].
During RANDOM play, you cannot skip to
tracks that have been played.
Search
Press and hold [–/2] or [6/+] during play
through
or pause.
tracks
• During program play (Z see below), or
random play (Z see below, "Play Mode
function"), you can search only within the
track.
Play Mode function
Press [·PLAY MODE] repeatedly to select the desired
mode.
1-TRACK
Play one selected track repeatedly on the disc.
REPEAT
Press [–/2] or [6/+] to select the track.
1-
REPEAT
Repeat play a disc or programmed tracks
(Z see below).
RANDOM
Play a disc randomly.
RND
Note
During "Program play", "Play Mode function" cannot be
activated.
Program play
This function allows you to program up to 24 tracks.
1
Press [4/9, CD] and then [8] (stop).
2
Press and hold [–PGM].
"PGM" is displayed.
3
Press [–/2] or [6/+] to select your desired track.
4
Press [–PGM].
Repeat steps 3 and 4 to program other tracks.
5
Press [4/9, CD] to start play.
Cancel
Press and hold [–PGM] in the stop mode.
program mode
Replay the
Press and hold [–PGM] then [4/9, CD] in
program
the stop mode.
Check program
Press [–/2] or [6/+] when "PGM" is
contents
displayed in the stop mode.
Clear all
Press and hold [8] (stop) in the stop
programmed
mode.
tracks
"CLEAR" is displayed.
Note
• When you try to program more than 24 tracks, "FULL"
appears.
• You will not be able to add more tracks to the existing
program. The existing program has to be cleared.
• The program memory is cleared when you open the disc tray.
NOTE about using a DualDisc
The digital audio content side of a DualDisc does not meet
the technical specifi cations of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
NOTE on CDs
Choose discs with this mark:
• This unit can access up to 99 tracks.
• This unit can play CD-DA format audio CD-R/RW that
have been fi nalised.
• It may not be able to play some CD-R/RW due to the
condition of the recording.
• Do not use irregularly shaped disc.
• Do not use disc with labels and stickers that are coming off
or with adhesive exuding from under labels and stickers.
• Do not attach extra labels or stickers on the disc.
• Do not write anything on the disc.

Using the FM/AM radio

Manual tuning
Manual tuning
1
Press [FM/AM] to select "FM" or "AM".
2
If "PGM" is displayed, press [TUNE MODE] to clear it.
3
Press [–/2] or [6/+] to select the frequency of the
required station.
To tune automatically
Press and hold [–/2] or [6/+] until the frequency starts
changing rapidly. The unit begins auto tuning, stopping
when it fi nds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [–/2] or [6/+] once
again.
To improve reception
FM: Extend the whip antenna and adjust its direction.
AM: Adjust the position of the unit.
To improve FM sound quality
When "FM" is selected
Press [FM MODE] to display "MONO".
To cancel
Press [FM MODE] again.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
Memory preset
Memory preset
Up to 16 stations each can be set in the FM and AM bands.
Preparation
Press [FM/AM] to select "FM" or "AM".
Automatic presetting
Press and hold [–AUTO PRESET] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order. When fi nished, the last station
memorised is tuned in.
5