Panasonic RX-D50 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic RX-D50. Panasonic RX-D50 14 pages. Portable stereo cd system
Également pour Panasonic RX-D50 : Manuel d'utilisation (12 pages), Manuel d'utilisation (24 pages), Manuel d'utilisation (28 pages)

Panasonic RX-D50 Manuel d'utilisation

Using the FM/AM radio

Manual tuning
Manual tuning
1
Press [FM/AM] to select "FM" or "AM".
2
Press [TUNE MODE] to select "MANUAL".
If "PGM" is displayed, press [TUNE MODE] to clear it.
3
Press [2/3] or [5/6] (main unit: [– /2] or [6/+]) to select
the frequency of the required station.
To tune automatically
Press and hold [2/3] or [5/6] until the frequency starts changing
rapidly. The unit begins auto tuning, stopping when it fi nds a station.
• Auto tuning may not function when there is excessive interference.
• To cancel auto tuning, press [2/3] or [5/6] once again.
To improve reception
FM: Extend the whip antenna and adjust its direction.
AM: Adjust the position of the unit.
To improve FM sound quality
When "FM" is selected
Press [FM MODE] to display "MONO".
To cancel
Press [FM MODE] again.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
Memory preset
Memory preset
Up to 16 stations each can be set in the FM and AM bands.
Preparation
Press [FM/AM] to select "FM" or "AM".
Automatic presetting
RX-D55
1
Press [PLAY MODE] repeatedly to select either "CURRENT" or
"LOWEST".
CURRENT
Tuning begins from the current frequency.
LOWEST
Tuning begins from the lowest frequency.
2
Press [AUTO PRESET] to start presetting.
RX-D50
Press [AUTO PRESET] to start presetting.
The tuner presets all the stations it can receive into the channels in ascending
order. When fi nished, the last station memorised is tuned in.
Manual presetting
1
Press [PROGRAM]
RX-D55
"PGM" is displayed.
2
Within 10 seconds or so
Press [2/3] or [5/6] to tune to
the required station.
3
Press [PROGRAM]
RX-D55
4
Press the numeric buttons to select a channel.
The station occupying a channel is erased if another station is preset to that
channel.
5
Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Press the numeric buttons to select a channel.
For channels 10 to 16 press [ 10], then the two digits.
OR
1
Press [TUNE MODE] to select "PRESET".
Press [TUNE MODE] to display "PGM".
2
Press [2/3] or [5/6]
(main unit: [– /2] or [6/+]) to select the
channel.
6
6
RX-D55
RX-D50
([MANUAL PRESET]
).
RX-D50
([MANUAL PRESET]
).
RX-D50
RX-D55
RX-D50
Preset channel
AM allocation setting
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in 10 kHz steps.
To change the step from 9 kHz to 10 kHz
1
Press and hold [FM/AM].
After a few seconds the display changes to a fl ashing display of the current
minimum frequency.
2
Continue to hold down [FM/AM].
• When the minimum frequency changes, release the button. To return to the
original step, repeat the above steps.
• After the setting is changed, any previously preset frequency will be
cleared.
USB
(
only)
RX-D55
The USB connectivity enables you to connect and play MP3 tracks from USB
mass storage class. Typically, USB memory devices (bulk only transfer).
Connecting a USB mass storage device
Connecting a USB mass storage device
Preparation
Before connecting any USB mass storage device to the unit, ensure that the
data stored therein has been backed up.
It is not recommended to use a USB extension cable. The device connected via
the cable will not be recognised by this unit.
USB enabled
device
(not included)
Playing a USB mass storage device
1
Reduce the volume and connect the USB mass storage device to the
USB port.
2
Press [4/9, USB] to start play.
Stop playback
Press [8] (stop) during play.
"RESUME" is displayed. The position is memorised.
Press [4/9, USB] to resume play.
Press [8] (stop) again to clear the position.
Pause play
Press [4/9, USB] during play.
Press again to resume play.
Skip tracks
Press [2/3] or [5/6] (main unit: [–/2] or
[6/+]).
Skip album
Press [R/T, ALBUM] in the play mode.
Press [R/T, ALBUM] once and then the numeric
buttons in the stop mode.
Recording from a USB mass storage device
1
Press [2/3] or [5/6] (main unit: [– /2] or [6/+]) to select
the desired track for recording.
2
Press [ V
] on the main unit to start recording.
Note
When you connect your digital audio player to the USB port, it charges all the
time except in standby mode.
NOTE on USB
Compatible devices
Devices which are defi ned as USB mass storage class:
• USB devices that support bulk only transfer.
• USB devices that support USB 2.0 full speed.
Supported format
• Folders are defi ned as album.
• Files are defi ned as track.
• Track must have the extension ".mp3" or ".MP3".
• CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS fi le system is not supported. [Only FAT 12/16/32
(File Allocation Table 12/16/32) fi le system is supported.]
• Depending on the sector size, some fi les may not work.
• Maximum album: 255 albums
• Maximum track: 2500 tracks
• Maximum track in one album: 999 tracks