Panasonic RX-DT670 Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic RX-DT670. Panasonic RX-DT670 25 pages. Portable stereo component system
Également pour Panasonic RX-DT670 : Manuel d'utilisation (24 pages)

Imprimer la page

RECORDING

■ Recording from

without edit

pause

func¬

tion

Press the operation switch and then press the "CD"

button of the function select buttons.

. Press the CD open/close button to insert a CD. And

press the CD open/close button to close the disc tray.

. Press the stop/eject button of the deck 1 to insert the

recording tape.

4. Press the record button.

The recording and disc play will begin.

Do not press the skip/search button during recording.

Monitor sound will be also recorded.

■ Recording radio broadcasts

. Follow the procedure described in "RADIO".

(See pages 15 and 16.)

2. Press the stop/eject button of the deck 1 to insert the

recording tape, then close the cover.

3. Press the record button.

Recording will begin.

To Stop the recording, press the stop/eject button.

The "tailored" frequency response, as set by the S-XBS

and graphic equalizer controls, is not recorded onto the

tape. This allows you to listen to the tape on different

systems and in different environments, and still be able

to tailor the playback frequency response of the tape.

•Edit recording speed/beat proof selector

When an AM broadcast is recorded, the edit recording

speed/beat proof selector can be used to reduce unwanted

"beat" signals (whistle) which are sometimes present. Set

the selector according to whichever position ("NOR/1 " or

"HIGH/I

beat reduces these "beat" signals.

■ Automatic recording level

This unit has an automatic level control (the recording level

is automatically adjusted).

■ Pause button

The pause button can be used to temporarily stop the tape

movement during recording or playback.

Before beginning a recording, first press and lock the pause

button. Then, press the record button, (The tape will not

move.) When ready to record, press the pause button to

release it. This will start tape movement for immediate

recording.

Note:

Do not use the pause button to stop the tape for a

long period of time.

■ Monitoring

The monitor system enables you to listen, through the

speakers or headphones, to the sound as it is being

recorded.

If it is necessary to adjust the volume level of the sound

being monitored, do so by using the volume control.

■ To erase recorded sound

When recording, previously recorded sound on the tape wilt

be erased automatically.

To erase a tape without re-recording, use the following

procedure.

Be sure to disconnect the mixing microphone from the

mixing microphone jack before following the steps.

1. Press the operation switch to turn on the unit.

2. Press the "TAPE" button of the function select buttons.

3. Insert the tape to be erased into the deck 1 by pressing

the stop/eject button.

4. Press the record button.

■ Synchronized editing (from deck 2 to deck 1)

When the deck 1 pause and record buttons are pressed,

tape editing starts by pressing the deck 2 playback button.

1. insert the playback tape into deck 2 and the editing tape

into deck 1.

2. Follow the procedure described in steps 2 and 3 of

"Single tape playback". (See page 17.)

3. Select the editing speed by setting the edit recording

speed/beat proof selector.

NOR/1: Normal speed

HIGH/II: Highspeed

4. Press the deck 1 pause button, then press the record

button.

5. Press the deck 2 playback button.

Editing is started by means of the synchro start function.

Do not press the "CD" or "TUNER" button of the func¬

tion select buttons during editing.

Do not change the editing speed during editing or the

playback sound may flutter.

Some TV sets generate noise that could be recorded

during editing. To prevent the possibility of this, do not

use this unit closer than 1.5 m to a TV set.

•To

Stop the editing

Press the deck 1 and deck 2 stop/eject buttons.