Panasonic RX-VT80 Manuel d'utilisation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic RX-VT80. Panasonic RX-VT80 14 pages. Portable stereo component system

Imprimer la page

Equalizer

• Four types of sound effects can be selected.

The selected sound effect button lights.

CLEAR: Lightens pop and other music

SOFT:

Allows background music enjoyment

HEAVY: Adds punch to rock

VOCAL: Enhances vocals

FLAT:

No sound effects used

• You can adjust the XBS effect to boost the

bass by turning the XBS adjustor.

Note

When you initially apply the power source

• The preset equalizer will automatically reset to

HEAVY when the unit is turned on.

When the unit is in TAPE/

OPR OFF

power source is connected

• The last preset equalizer setting will be retained when you turn on

the CD, RADIO or TAPE function.

Using an external unit

ex. connecting to the VCR

Rear panel of this unit

VIDEO OUT

VIDEO

OUT

(L)

LINE

OUT

(R)

AUDIO

OUT

• Set the VIDEO SWITCH according to the VCR to be connected.

• A video cassette recorder (VCR), or other recording equipment, can

also be connected.

• For details, refer to the instruction manual of the units which are to

be connected.

• When units other than those described above are to be connected,

please consult your audio dealer.

Recording to an external unit

1. Set [SELECTOR] to the source to be recorded.

2. Turn on the VCR or other recording equipment and make all

necessary settings.

3. Start record on the VCR (or other recording equipment) and then

start play on the source of the recording.

Maintenance

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using a chemically treated cloth, read the instructions that

came with the cloth carefully.

For a cleaner, crisper sound

Clean the heads regularly to assure good quality playback and

recording.

Use a cleaning tape (not included).

Lens care

Clean the lens regularly to prevent

malfunctions.

Use a blower to remove dust and a

cotton swab if it is extremely dirty.

Using headphones

Turn down the volume and

connect the headphones to the

PHONES jack.

Plug type: 3.5 mm stereo

Note

Avoid listening for prolonged periods

of time to prevent hearing damage.

Specifications

Radio

Frequency band

SW1

SW2

Tape recorder

Track system

Recording system

Erasing system

Monitor system

Frequency range

Normal

Sampling frequency

Decoding

Beam source/wavelength

Number of channels

Wow and flutter

D/A converter

Video

Signal system

Output level

MP3

Sampling frequency

General

Power supply

Battery

12 V (Eight R20/LR20, D, UM-1 batteries)

DC IN

Output power

(DC 12 V/AC 117 V): 18 W x 2/11.9 W x 2...RMS (max.)

Speakers

2 Super tweeter; 1.5 cm Ceramic type

Jacks

Output

Remote control

Battery

DC 3 V (Two R6/LR6, AA, UM-3 batteries)

Control keys

Dimensions (WxHxD)

Mass

Power consumption in standby mode:

Note

Specifications are subject to change without notice.

Mass and dimensions are approximate.

(not included)

87.5–108 MHz

520–1610 kHz

2.3–7.0 MHz

7.0–22.0 MHz

4 track, 2 channel, stereo

AC bias

Multi pole magnet

Variable sound monitor

40–12000 Hz

44.1 kHz

16 bit linear

Semiconductor laser/780 nm

2 channel, stereo

Below measurable limit

MASH (1 bit DAC)

NTSC/PAL

Composite video, 1 Vp-p (75 Ω)

32 kHz, 44.1 kHz, 48 kHz

110–127 V/220–240 V, 50/60 Hz

Power consumption: 41 W (50 Hz)

12–13.2 V

330 W...PMPO

2 Woofer; 12 cm Cone type, 4 Ω

2 Tweeter; 5.4 cm Cone type, 4 Ω

VIDEO OUT

LINE OUT: 10 kΩ

Headphones: 32 Ω

37 keys

696 x 302 x 265 mm

Main unit: 278 x 302 x 265 mm

Speaker box: 209 x 295 x 225 mm

8.5 kg without batteries

4.3 W

RQT7801