Panasonic SA-AK230 Manuel d'utilisation - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic SA-AK230. Panasonic SA-AK230 16 pages. Cd stereo system model no. sc-ak330; sc-ak230
Également pour Panasonic SA-AK230 : Manuel d'utilisation (16 pages), Manuel d'entretien (5 pages)
Imprimer la page
Specifications
AMPLIFIER SECTION
AK330
FTC output power
THD 10%, both channels driven
100 Hz–3 kHz
(Low channel) 64 W per channel (5 Ω)
3 kHz–10 kHz
(High channel) 60 W per channel (5 Ω)
Total Bi-Amp power
RMS output power
THD 10%, both channels driven
1 kHz
(Low channel) 90 W per channel (5 Ω)
10 kHz
(High channel) 90 W per channel (5 Ω)
Total Bi-Amp power
AMPLIFIER SECTION
AK230
FTC output power
THD 10%, both channels driven
100 Hz – 10 kHz
69 W per channel (5 Ω)
Total FTC power
RMS output power
THD 10%, both channels driven
100 W per channel (5 Ω)
1 kHz
Total RMS power
FM/AM TUNER, TERMINALS SECTION
Preset station
FM 15 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range
87.9 – 107.9 MHz (200 kHz steps)
87.5 – 108.0 MHz (100 kHz steps)
Sensitivity
2.5 ØV (IHF)
S/N 26 dB
Antenna terminal(s) 75 Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range
520 – 1710 kHz (10 kHz steps)
Sensitivity
S/N 20 dB (at 1000 kHz)
Audio performance (Amplifier)
Input sensitivity/Input impedance
Aux
250 mV, 14.7 kΩ
Phone jack
Terminal
Stereo, 3.5 mm (
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
•
Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using a chemically treated cloth, read the instructions that
came with the cloth carefully.
Product Service
1. Damage requiring service —The unit should be serviced by
qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged;
or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change
in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing —Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing
to authorized servicing personnel.
3. Replacement parts —When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
CASSETTE DECK SECTION
Track system
Heads
Record/playback
Erasure
Motor
Recording system
Erasing system
248 W
Tape speed
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
NORMAL
S/N
Wow and flutter
Fast forward and rewind time
360 W
DISC SECTION
Discs played [8 cm (3˝) or 12 cm (5˝)]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3 formatted
disc)
138 W
(3) MP3
Bit rate
MP3
Sampling frequency
MP3
200 W
CD
Decoding
Digital filter
D/A converter
Pickup
Wavelength
Beam Source
Audio output (Disc)
Number of channels
2.2 ØV
SPEAKER SECTION
Type
3 way, 3 speaker system (Bass reflex)
Speaker(s)
Woofer
Tweeter
560 ØV/m
Super tweeter
Impedance
HIGH
LOW
Input power (IEC)
1
/
˝) jack
HIGH
8
LOW
Output sound pressure level
Cross over frequency
Frequency range
Dimensions (WxHxD) 240 x 330 x 230 mm
Mass
SPEAKER SECTION
4 track, 2 channel
Type
Speaker(s)
Solid permalloy head
Double gap ferrite head
DC servo motor
Impedance
AC bias 100 kHz
Input power (IEC)
AC erase 100 kHz
Output sound pressure level
4.8 cm/s (1
7
/
ips)
8
Cross over frequency
Frequency range
35 Hz–14 kHz
50 dB (A weighted)
Dimensions (WxHxD) 220 x 330 x 201 mm
0.18% (WRMS)
Approx. 120 seconds with
Mass
C-60 cassette tape
GENERAL
Power supply
Power consumption
Dimensions (WxHxD) 250 x 330 x 341 mm
Mass
32 kbps–320 kbps
Operating temperature range
32 kHz, 44.1 kHz, 48 kHz
44.1 kHz
16 bit linear
Operating humidity range
8 fs
MASH (1 bit DAC)
780 nm
Semiconductor laser
2 (Stereo) (FL, FR)
Note:
1. Specifications are subject to change
AK330
2. Total harmonic distortion is measured by
16 cm (6
1
/
˝) cone type
2
6 cm (2
3
/
˝) cone type
8
3.
Piezo type
5 Ω
5 Ω
90 W (Max)
90 W (Max)
83 dB/W (1.0 m)
2.6 kHz, 10 kHz
37 Hz–23 kHz (–16 dB)
44 Hz–22 kHz (–10 dB)
7
1
(9
/
˝ x 13˝ x 9
/
˝)
16
16
3.2 kg (7.1 lb.)
For a cleaner, crisper sound
Clean the heads regularly to assure good quality playback and
recording.
Use a cleaning tape (not included).
4. Safety check —After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper working
condition.
Product information
For product information or assistance with product operation:
In the U.S.A., refer to "Customer Services Directory" on the
back page.
In Canada, contact the Panasonic Canada Inc. Customer Care
Centre at 905-624-5505, or visit the website (www.panasonic.ca),
or an authorized Servicentre closest to you.
AK230
2 way, 2 speaker system (Bass reflex)
1
Woofer
16 cm (6
/
˝) cone type
2
Tweeter
6 cm (2
3
/
˝) cone type
8
100 W (Max)
81 dB/W (1.0 m)
35 Hz–28 kHz (–16 dB)
50 Hz–26 kHz (–10 dB)
(8
21
/
˝ x 13˝ x 7
32
2.7 kg (6.0 lb.)
AC 120 V, 60 Hz
AK330
AK230 : 165 W
27
(9
/
˝ x 13˝ x 13
32
AK330
: 7.1 kg (15.7 lb.)
AK230 : 6.9 kg (15.2 lb.)
+5 to +35 °C (+41 to +95 °F)
5 to 90 % RH (no condensation)
Power consumption in standby mode
AK330
AK230 : 0.34 W
without notice.
Mass and dimensions are approximate.
the digital spectrum analyzer.
AK330
The labels "HIGH" and "LOW"
on the rear of the speakers refer to High
frequency and Low frequency.
5 Ω
4 kHz
29
/
˝)
32
: 238 W
7
/
˝)
16
: 0.38 W
15
RQT7790