Panasonic SA-AK28 Manuel d'utilisation - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic SA-AK28. Panasonic SA-AK28 32 pages. Cd stereo system model no. sc-ak28; sc-ak18
Imprimer la page
4
2
1
1
2
3
4
5
7
A
B
3
5
7
Specified disc number
Specified track number
Program order
Indicates
program mode
Listening to compact discs
Program play
by remote control only
You can program up to 24 tracks.
Press [CD].
1
Ensure CD is stopped.
Press [PROGRAM].
2
Press [DISC].
3
(within 10 seconds or so)
4
Press [1] – [5] to select the disc you want.
Press the numeric button to select the desired track.
5
Repeat steps 3 through 5 until you have pro-
6
grammed all the tracks you want.
- -
- - /J/4].
Press [-
7
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing [L] will cancel program play, but it will also erase the entire
program.
To select a two-digit track
Press [ 10] and then the two numbers you want.
A
When "CD FULL" appears
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
You can do the following during program mode
•
Check program contents.
Press [g/(] or [)/f].
Every time you press one of the buttons, the track and program No.
are shown on the display.
•
Add to the program.
Repeat steps 3 through 5.
•
Cancel entries.
From the last
Press [CANCEL].
programmed track
A specified track
Select the track with [g/(] or
only
[)/f], and press [CANCEL] within
3 seconds.
All tracks
Press [L].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press [-/J/4].
If you program a track not on your CDs
The track is initially programmed, but during program play, the player
will skip that track and will continue playing from the next programmed
item.
B
17
RQT5265