Panasonic SA-AK28 Manuel d'utilisation - Page 23
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic SA-AK28. Panasonic SA-AK28 32 pages. Cd stereo system model no. sc-ak28; sc-ak18
Imprimer la page
3
6
1
2
3
5
1
2
6
Recording from compact discs
5
Press [c DECK 2 OPEN], and insert the tape.
1
Close the holder by hand.
Tape direction is automatically set to " 3".
2
Press [REV MODE] to select the reverse mode.
Every time you press the button:
1
2
,
Press [CD].
3
Insert CD in the tray.
4
(Perform steps 1 ~ 2 on page 15).
Press [(CD 1) ~ (CD 5)] to select the disc you want.
5
Pressing [L] will stop playback.
Tape direction
Press [a REC/STOP] to start recording.
6
•
If you selected " ,
automatically change to "
•
The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final
disc (page 15).
•
The tape deck stops automatically when the CD is finished.
To stop recording
•
To add a 4 second silent interval before stopping
Press [L]. The CD will stop automatically too.
•
To stop recording without a silent interval
Press [a REC/STOP]. The CD will stop automatically too.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [/] and immediately thereafter [L]. The tape direction will
be shown as "4".
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To record programmed tracks
1. After step 4, program the track you want (perform steps 2~6 on
page 17).
2. Press [a REC/STOP] to start recording.
: One side is recorded, then recording stops auto-
matically.
: Both sides (front side
reverse side) are
recorded, then recording stops automatically.
" in step 2, the direction will
" when recording starts.
23
RQT5265