Panasonic SA-AK340 Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Panasonic SA-AK340. Panasonic SA-AK340 20 pages. Cd stereo system model no. sc-ak340; sc-ak240

Imprimer la page

NOTE on MP3 or WMA

• Files are treated as tracks and folders are treated as albums.

• This unit can access up to 999 tracks, 255 albums and 20

sessions.

• Disc must conform to ISO9660 level 1 or 2 (except for extended

formats).

• To play in a certain order, preﬁ x the folder and ﬁ le names with 3-digits

numbers in the order you want to play them.

When "NOT MP3/ERROR1" appears on the display, an unsupported

MP3 format is being played. The unit will skip that track and play the

next one.

• Noise may occur when playing WMA ﬁ les.

• This unit cannot play WMA ﬁ les that are copy protected.

Limitations on MP3 or WMA play

• If you have recorded MP3 or WMA on the same disc as CD-DA,

only the format recorded in the ﬁ rst session can be played.

• Some MP3 or WMA may not be played due to the condition of the

disc or recording.

• Due to differences and variations of WMA tags, some ﬁ les may not

play or display the tags' information properly.

• Recordings will not necessarily be played in the order you recorded

them.

MPEG Layer-3 audio decoding technology licensed from

Fraunhofer IIS and Thomson multimedia.

Windows Media, and the Windows

logo are trademarks, or registered

trademarks of Microsoft Corporation

in the United States and/or other

countries.

WMA is a compression format

developed by Microsoft Corporation.

It achieves the same sound quality

as MP3 with a ﬁ le size that is smaller

than that of MP3.

Cassette tape – Play and record

The buttons described for "Cassette tape – Play and

record" are mainly for the main unit unless indicated

otherwise.

Basic play

You can use either DECK 1 or DECK 2 for tape playback.

Use normal position tapes.

High position and metal position tapes can be played, but

the unit will not be able to do full justice to the characteristics

of these tapes.

Press [3, TAPE].

The unit turns on.

If a cassette was loaded, play starts automatically (One

touch play).

Press [0 OPEN] for DECK 1 or [OPEN 0] for DECK 2

and insert the cassette.

Insert with the side to be played facing towards you

and the exposed tape facing down. Close the holder by

hand.

Press [3, TAPE] to start play.

Action

Press [ 7, STOP].

stop tape playback

Press [4 / REW / ] or [ / FF / ¢].

fast-forward and

rewind

select between

Press [DECK 1/2] (remote control :

loaded decks

[PLAY MODE]).

Note:

• Tape playback is momentarily interrupted if you open the other

deck.

• Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

• Tape slack can get caught up in the mechanism and should be

wound up before the tape is played.

• Endless tapes can get caught up in the deck's moving parts if used

incorrectly.

Front side

RQT8043