DIAQUIP QDS-500 Manuel de l'opérateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} DIAQUIP QDS-500. DIAQUIP QDS-500 12 pages. Diamond drilling drill stands

Imprimer la page

INTRODUCTION:

ORIGINAL INSTRUCTIONS: For your personal safety, read and understand before using.

Save these instructions for future reference

This drill stand is designed to mount diamond core drilling motors by using a suitable mounting

spacer. A standard 4 bolt mounting spacer is included with this stand. The drill stand guides

the motor and diamond core bit so that it is possible to drill perfectly straight cuts in a safe and

controlled manner.

The stand is also able to slant so that holes may be cored at an angle as required.

This stand must be securely fastened to the workpiece using a concrete anchor.

WARNING: Do not attempt to use this stand if the mounting system does not fit perfectly

to the drilling motor.

MOUNTING THE MOTOR TO THE DRILL STAND

Rig-Mounted Type Motors:

If the drill motor is the 4 bolt rig-mounted type, the drill stand's mounting spacer must be bolted

to the drill motor. The mounting tenon must fit securely in the slot in the back of the drill motor,

then evenly tighten the four bolts. This mounting spacer now acts as a secure and accurate

coupling between the drill motor and the drill stand. The mounting spacer now fits in the dovetail

in the stand's cradle and is secured by the cradle lock bolt.

Hand-Held Type Motors:

If the drill motor is the hand-held type, the clamp bracket must be used. The clamp bracket

must first be bolted to the mounting spacer. Then the motor's gearcase collar must be mounted

in the clamp bracket. Generally, the drill motor's side handle will need to be first removed. To

insert, first loosen the clamp bracket using the crank handle as a wrench, then insert the motor,

turn to the desired orientation and then securely fasten the clamp bolt.

Now the assembly may be fitted into the dovetail in the stand's cradle and the cradle lock bolt

securely tightened.

/04