Diasend Transmitter Manuels rapides - Page 8
Parcourez en ligne ou téléchargez le pdf Manuels rapides pour {nom_de_la_catégorie} Diasend Transmitter. Diasend Transmitter 16 pages.
Imprimer la pageUnderstand the diasend® Transmitter lights:
ok light
•
SLOW FLASHING
The green light flashes
slowly when the transmitter
is connecting to the GSM
network.
•
RAPID FLASHING
The Transmitter is updating
itself. The green light will flash
rapidly during a sustained
period of time. You can start
using the transmitter once the
blue light flashes slowly again.
•
STEADY LIGHT ON
The green light signals a
successful upload when it has a
steady light.
diasend® Transmitter lights during successfull upload
The following sequence of lights illustrates a successful upload using diasend® Transmitter:
1
1. Connect diasend®
Transmitter to a power outlet
2
2. The green
slowly for a few minutes when
starting up.
3
3. The
slowly. The Transmitter is now
in stand-by mode and is ready
for use.
send light
•
SLOW FLASHING
The transmitter is
ready for use.
•
RAPID FLASHING
Data is being uploaded.
ok
light will flash
send
light will flash
error light
•
STEADY LIGHT ON
A red steady light signals that the latest
upload was not successful. This is most
likely due to temporary issues related to the
wireless GSM network. Please try to upload
the patient device again.
•
RAPID FLASHING
The red light flashes rapidly alongside the
green light when the Transmitter cannot find
a network.
4
4. Connect a diabetes device to the
Transmitter.
5
send
5. The
as the data is being uploaded.
6. If the upload was successful, the
6
green
ok
light will be a steady green
light and the blue
flashing slowly again. The Transmitter
is now ready for another upload.
light will flash rapidly
send
light will start
8