BIOMET SpinalPak Manuel du patient - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du patient pour {nom_de_la_catégorie} BIOMET SpinalPak. BIOMET SpinalPak 12 pages. Non-invasive spine fusion stimulator system
Également pour BIOMET SpinalPak : Manuel complet et notice d'accompagnement (10 pages)

Imprimer la page

1. System Components

Troubleshooting - Electrodes

• C hange your electrodes as required. Different skin types will

cause a longer or shorter life of the electrodes. If the alarm

indicates a disconnection, it is likely that either the lead wire

connection is incomplete or the adhesive (gel) on the electrode

is no longer working and the electrodes need changing.

Check all lead wire connection points, to make sure that the

electrode lead wire is tightly plugged into the top of the Biomet

SpinalPak

Non-invasive Spine Fusion Stimulator System

(Figure 10) and that the lead wire connectors are completely

inserted into both electrode connectors. If all the connections

are made and the symbol indicates a disconnection, it is

probably time to change the electrodes.

• R emove the old electrodes from your skin.

• W ash your skin gently with soap and water and dry.

• R emove two new electrodes from the packaging and store the

liner for future use.

• G ently press the electrodes on your skin in the same place

as before. Ask another person for help if you cannot reach

the site easily. If your skin is very red, place the electrodes

slightly above or below the original sites. Call your prescribing

physician if the redness does not go away in 48 hours. It is

normal to note a slight pinkness of the skin after removal of

the previous pair of electrodes. This pinkness will fade within a

short period of time.

NOTE: The Biomet

Stimulator System accurately records the number of days you

receive treatment. This helps your doctor track your treatment.

SpinalPak

Non-invasive Spine Fusion

Figure 10