Easypix Jelly Body t514 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Easypix Jelly Body t514. Easypix Jelly Body t514 2 pages.

Imprimer la page

Note: There is only one right direction to insert the SD memory card into the slot. Do not force the

card into the slot, or else it may damage both the camera and the SD memory card.

Note: The SD memory card must be formatted before taking photographs. See the following

sections for more information.

5.3 Formatting the memory or SD card

Formatting SD card will delete all information in SD card.

Turn on the camera, press the menu button in PHOTO mode.

Select the setup mode by press the right or left button.

Select the format icon by press the up or down button and press the Menu button to

confirm.

Select OK icon by press the up or down button and press the Menu button to confirm.

Press up or down button to select yes icon and press the Menu button to confirm.

5.4 Setting the Image Size

The camera can be set to different resolutions.

Press the menu button in PHOTO mode, select the Image Size icon by right or left key and

press the up or down button to select the resolutions.

8 different resolutions will be displayed. Select the desired resolution by using the up or

down buttons and press the Menu button to confirm the selection.

5.5

Taking photographs

Turn on the camera.

Depending on the distance to the object being photographed, use macro switch to adjust

the distance. Select the flower symbol (

) if you wish to take a close-up photograph

(25cm –40cm).

If you wish to take video or photograph of surroundings or people (1.5m – infinity), set the

macro switch to normal mode (

If you are not sure if there is enough lighting, turn the automatic flash(

the up(flash) button. (If the battery power is too low, the flash won't be activated).

Use the LCD screen to aim the object you wish to take photograph.

Use the face detection to aim the people you wish to take photograph.

Press SHUTTER button and wait until the LCD display turn on again.

If 'SMILE' detection is ON, shutter will be activate automatically once a smile face is

detected

Caution: 1) Taking picture for fast-moving object is not recommended.

2) Image may be distorted when taking picture in a moving vehicle.

5.6

Zoom in and out

Zoom in or out by pressing the Button A or Button B, a Zoom out icon will appear on the display,

4x is the maximum zoom ratio.

5.7

Self-timer setting

You can use the self-timer function when you wish to take a photograph for yourself or when you

wish to take a photograph for an object which the camera must be as still as possible.

Set the camera to photo mode.

Press the MENU button. The menu will appear.

Press the Right or Left button to select Self Timer menu.

Press the up or down button to set the delay time: Off/2seconds/5seconds/10seconds.

Press the MENU button to confirm. The self-timer function is now ready for use.

Aim at the object you wish to take photo.

Press the SHUTTER button to take a photograph.

The photo will be taken after the timer reaches the delay time that you pre-setted and the

self timer LED indicator will flash 2, 5 or 10 seconds (per your selection) until the photo is

taken.

5.8

Recording video clips

Turn on the camera.

For setting the resolution, Press MENU button and select setup menu, then press the up or

down button to select the Video Size icon, the press MENU button to confirm. Two

resolutions will be displayed.

VGA (640 x 480) QVGA( 320 x 240).

Press the DOWN button to start recording video, press the DOWN button again to stop

recording. The video clip will now be saved as an AVI file in the camera memory.

5.9

Playback photographs

Press the RIGHT button to get into playback mode.

Press the left or right buttons to see photographs.

Press the B button turn to camera mode.

Press the A button to delete the image.

5.10 Playback video clips

Press the RIGHT button to get into playback mode, press the RIGHT or LEFT button to

select the video and press the UP button to play and press again to stop the playback.

When playing the video press right button to show the playback.

Press the B button turn to camera mode.

Press the A button to delete the video.

5.11 Delete photographs and video clips

You can choose to delete a single photograph / video clip, or delete all the photographs / video

clips in the memory.

Follow the instructions given below to delete photograph.

Press the RIGHT button to enter the playback mode.

Press left or right button to select photograph/video clip to be delete.

Press the MENU button and press RIGHT OR LEFT button and select Delete Icon and

select Delete This Image (Video) / All.

Press the MENU button to confirm.

NOTE: Select "All" and Press the MENU button to confirm, all the pictures and videos will be

deleted.

6. Connecting to a PC

The unit can be connected to the computer as mass storage device and transfer photo/video files

for storage.

7. Specifications

) on by pressing

Sensor

5.0 Mega pixel CMOS sensor

14 Mega pixels: (4416 x 3312)

10 Mega pixels: (3468x2736)

8 Mega pixels: (3264 x 2448)

7Mega pixels: (3648 x 2048)

Image resolution

5Mga pixels: (2592 x 1944)

3Mega pixels: (2048 x 1536)

2Mega pixels: (1920 x1080)

VGA: (640x480)

Lens

F/3.0 f = 7mm

Focus range

1.5m. ~ Infinity

Macro mode

25cm – 40cm

Digital zoom

Flash strobe

Built-in ( Auto / force / off )

LCD display

2.7" TFT color display

White balance

Auto/Daylight/Cloudy/Incandescent/Fluorescent

Video mode

VGA&QVGA

External memory card

SD card supports up to32GB

File format

Picture: JPEG, Video: AVI

Off/2Seconds/5Seconds/10 seconds

Self timer

PC interface

USB 2.0

Power source

Lithium battery

8. System requirement

Windows XP / Vista or above

Operating system

Mac 10.5.x or later

CPU

Pentium III or above

RAM

At least 128MB

Interface

USB port

4x speed CD ROM or above

9. Troubleshooting

Problem

Cause

Cannot turn on the camera

Low battery power.

Battery placed at wrong

polarities.

Photos cannot be saved

The memory card or built-in

when taking pictures.

memory hasn't been

formatted properly.

Cannot find removable disk

Connection failure.

after connecting the

camera to the computer

Flash does not work.

Battery power is too low.

The photos are blurry

1. The camera is not held

steadily

2. The lens of camera is

dirty.

For technical help please visit our support area on www.easypix.eu.

Solution

Replace or install the battery

correctly.

Format the memory in setup

mode of the camera. Please

refer to section 5.3.

Make sure all cable connections

are secured and restart the

computer if necessary.

Please charge the battery

1. Hold the camera steadily until

it beeps when taking video

photo.

2. Clean the lens with soft dry

cloth.