dibea D500 Pro Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} dibea D500 Pro. dibea D500 Pro 9 pages. Robot vacuum cleaner
Imprimer la page
Product Maintenance
Dust bin and filter screen cleaning
After removing the dust bin, please check whether there is any foreign matter in the
suction port and clean it.
Open it from the flap "PUSH", take out the dust bin, open the door of the dust bin, and
dump the internal garbage.
Hold the small handle of the HEPA and pull out the HEPA.
Wash the dust bin and filter screen with water and pat the accumulated dust on the HEPA.
After cleaning, put the HEPA back into the dust bin in order.
Cover the door of the dust bin and put it into the host.
Notice:
It is recommended to clean the dust bin once a week.
It is recommended to wash the HEPA and filter screen once after using 15 - 30 days.
Before installation, please ensure that the filter screen and the HEPA are in a dry state.
Do not expose the filter screen and HEPA to the sun.
HEPA is a replaceable accessory.
2
Product Maintenance
Use and cleaning of side brush
1
Installation of side brush
At the time of installing, it shall be noted that the side
brush should be consistent with the left (L) and right (R)
of the bottom shell, and the parts are marked with "L" and
"R". After one-to-one correspondence, press directly, and
it will be OK after hearing the tone of clasping.
Notice: If L and R are installed incorrectly, the machine will
shake when it runs.
Disassembly of side brush
2
At the time of disassembling, grasp the three brushes at
the same time and pull them up.
Cleaning of side brush
3
Check whether the side brush is damaged or has foreign
matter.
Clean the side brush with a cleaning tool or a piece of
duster cloth.
If crimping or deformation occurs, remove the side brush
and keep it in warm water for about 5s.
When the side brush is damaged and cannot be used,
please replace it in time.
Sensor cleaning
Wipe the sensor with a cleaning tool or a piece of soft cloth, as the below figure show.
Cliff Sensor
Collision Rod Light Filter
L
Rear Window
3
R