HTC 5004 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HTC 5004. HTC 5004 11 pages. Digital micro ohm meter

Imprimer la page

I. Safety rules and precautions

Thank you for purchasing our company's Digital Micro Ohm Meter. In order to better use this product,

please be sure to:

——Read this user manual in detail.

——Strictly follow the safety rules and precautions listed in this manual.

In any case, special attention should be paid to safety when using this tester.

Can't to measure live objects. Before measuring, make sure that the measured resistance or metal body is

not charged, otherwise there is a danger of burning the instrument.

The battery low voltage symbol shows, please charge it in time, 5-8 hours per charge.

If the meter is left unused for a long time, please charge the battery every 1-2 months.

Please stop using the meter when the test wire is broken and the metal is exposed.

Do not place or store the tester for a long time in a place with high temperature and humidity,

condensation and direct sunlight.

u Precision instruments must be maintained regularly. Keep the body and test lines clean and do not

drop them.

u Use, dis assembly and maintenance of this tester must be operated by authorized personnel.

u Due to the reason of this tester, if it is dangerous to continue using it, it should be stopped immediately,

sealed up immediately, and handled by an authorized organization.

u The user must follow the instructions for safe operation of the " " hazard signs on the tester and

manual.

II ． Introduction

Digital Micro Ohm Meter, also known as micro-ohmmeter, ohmmeter, equipotential tester, using the

microprocessor technology, four-wire test, safety, precision and reliability.Mainly used to measure the wire

resistance of cables, the contact resistance of switches, connectors, relays, the resistance of coils, motors,

transformer windings, and equipment enclosures, lightning protection belts, ground beams, structures,

cabinets, steel bars, water pipes, windows, guardrails, and heat dissipation Connection resistance test

between metal components of objects such as devices, assembly lines, etc.

It is widely used in telecommunications, electric power, meteorology, computer rooms, oil fields, power

distribution lines, tower transmission lines, gas stations, factory grounding grids, lightning rods, etc.

Digital Micro Ohm Meter is composed of host, monitoring software, test line, communication line, etc. The

large-screen LCD display of the main unit is clear at a glance, and the port overload prevention function

prevents the instrument from being burned out by misoperation.Store 500 sets of data, resistance

measurement range: 0.001mΩ~ 300.0KΩ. The upper computer software has functions such as historical

data reading, consulting, saving, and reporting.

III. Range and accuracy

5004

Note: within 18 ℃ ~28 ℃ , above 70%rh, within -10 ℃ ~50 ℃ , below 80%rh: ±0.2%FS±20dgt.

0.01mΩ～100.00mΩ

100.1mΩ～1000.0mΩ

1.001Ω～10.000Ω

10.01Ω～100.00Ω

100.1Ω～1000.0Ω

1.001KΩ～10.000KΩ

10.01KΩ～30.00KΩ

Within 18℃~28℃,

Below 70%rh:

±0.1%FS±20dgt

- 3 -

0.01mΩ

1.2A

0.0001Ω

1.2A

0.001Ω

1.2A

0.01Ω

0.5A

0.0001KΩ

0.05A

0.001KΩ

5mA

0.01KΩ

0.5mA